post yours iphones software problems ..
- Thread starter rajeshchiyyan
- Start date
sachin5122
Newbie
- Joined
- Jan 8, 2012
- Posts
- 1
- Likes
- 0
answer: post yours iphones software problems ..
hi,friend
u just need to creat a custem ipsw file from orignal ipsw file using redsnow or snobreez tools.mark hack activition.
hi,friend
u just need to creat a custem ipsw file from orignal ipsw file using redsnow or snobreez tools.mark hack activition.
answer: post yours iphones software problems ..
Brother fast what!s problem 2nd what!s version redsn0w_ and model send full info after i am try solved your problem...............
Brother fast what!s problem 2nd what!s version redsn0w_ and model send full info after i am try solved your problem...............
jijaimobilecare
Newbie
- Joined
- Apr 22, 2012
- Posts
- 1
- Likes
- 0
answer: post yours iphones software problems ..
how to check iphone 2g 3g 4g
how to check iphone 2g 3g 4g
answer: post yours iphones software problems ..
Respected DhakaB,
am I in trouble since my poor financial state, however I AM
)
I have locked Iphone4 (ios 4.3.3 - 8j2) unlocked with pevey card, never looked what BB-FW it was. All worked good since i had no access to applications and weird way for turning device on (airplane mode, call 122 etc etc)
I started my own hacking and did several mistakes since i first heard about redsnow, sbowbreeze etc
Later on i turned ifaith, TinyUmbr absinth into my operation.
I jailbreaked 4.3.3 to ios 6.0.1, without saving shsh blobs for previous ios/baseband - do not know which exactly it was, but one that Pevey unlocks.
Now stucked with 4.12.02 firmware, somehow succeded to downgrade to 4.3.3 but firmware never went down, still 4.12.02 which pevey is UNcapable of unlocking.
which steps to do (like downgrading ios) that may downgrade baseband too to a firmware pevey unlocks. What can i do if probable have saved but right now, blobs just for current 4.3.3 but bb 4.12.02? May I go somewhere down so pevey works since i don t know nor have money to unlock this carrier in Austria ( in my country they want me to pay 150 eur). Is ist possible that ifaith found blobs for me for an earlier versions but in strange file format, not .shsh but .iFaith..are those shsh blobs and how to convert them into .shsh and to Strich or restore with redsnow if those are right down version blobs...
.
Phone is locked with some Austrian carrier
IMEI: 012837004362357
SERIAL: JR127HTNA4S
family: iPhone
product description: IPHONE 4 16GB BLACK
product version: 6.0.X
product sold by: HUTCHISON 3G AUSTRIA GMBH
coverage status: Out Of Warranty (No Coverage)
purchase date: 08/06/11
purchased in: Austria
mac address: 50EAD61BDDCB
country code: ()
locked: yes
activated: no
first activation date: 01-01-1970 01:00:00
last activation date: 01-01-1970 01:00:00
initial activation policy: 323 (Austria Hutchison.)
applied activation policy: ()
next tether policy: 323 (Austria Hutchison.)
Read more at iphone carrier check free for all - Page 6 - IMEI Source
and more info on current status:
DeviceName: GIO
DeviceClass: iPhone
ProductType: iPhone3,1
ProductVersion: 4.3.3
SerialNumber: JR127HTNA4S
UniqueDeviceID: 3c9aadb4afafd98ed63877ea66f66dce786cd451
ModelNumber: MC603
BuildVersion: 8J2
HardwareModel: N90AP
DeviceColor: black
RegionInfo: FD/A
CPUArchitecture: armv7
WiFiAddress: 50:ea:d6:1b:dd:cb
BluetoothAddress: 50:ea:d6:1b:dd:ca
PartitionType: GUID_partition_scheme
FirmwareVersion: iBoot-1072.61
ActivationState: FactoryActivated
BasebandVersion: 04.12.02
BasebandBootloaderVersion: ICE_2_13
BasebandChipId: 80
BasebandGoldCertId: 257
ICCID: 8938101120719215458
IMEI: 012837004362357
IMSI: 001012003612165
MLBSerialNumber: J51267MYGDPMH
MobileSubscriberCountryCode: 001
MobileSubscriberNetworkCode: 01
PasswordProtected: False
ProductionSOC: True
ProtocolVersion: 2
SDIOProductInfo: P=N90 m=3.1 V=u
SIMStatus: kCTSIMSupportSIMStatusReady
SupportedDeviceFamilies: 1
TimeIntervalSince1970: 1353638278
TimeZone: Europe/Belgrade
TimeZoneOffsetFromUTC: 3600
UniqueChipID: 3573414550861
Uses24HourClock: False
Keyboard: en_US
BatteryIsCharging: False
BatteryCurrentCapacity: 98
Region: LI
Label: iPhone 4 GSM (16GB) Black
Description: iPhone 4
Contact: http://www.apple.com/support/contact/phone_contacts.html
in advance, THANK YOU
Respected DhakaB,
am I in trouble since my poor financial state, however I AM
)I have locked Iphone4 (ios 4.3.3 - 8j2) unlocked with pevey card, never looked what BB-FW it was. All worked good since i had no access to applications and weird way for turning device on (airplane mode, call 122 etc etc)
I started my own hacking and did several mistakes since i first heard about redsnow, sbowbreeze etc
Later on i turned ifaith, TinyUmbr absinth into my operation.
I jailbreaked 4.3.3 to ios 6.0.1, without saving shsh blobs for previous ios/baseband - do not know which exactly it was, but one that Pevey unlocks.
Now stucked with 4.12.02 firmware, somehow succeded to downgrade to 4.3.3 but firmware never went down, still 4.12.02 which pevey is UNcapable of unlocking.
which steps to do (like downgrading ios) that may downgrade baseband too to a firmware pevey unlocks. What can i do if probable have saved but right now, blobs just for current 4.3.3 but bb 4.12.02? May I go somewhere down so pevey works since i don t know nor have money to unlock this carrier in Austria ( in my country they want me to pay 150 eur). Is ist possible that ifaith found blobs for me for an earlier versions but in strange file format, not .shsh but .iFaith..are those shsh blobs and how to convert them into .shsh and to Strich or restore with redsnow if those are right down version blobs...
.
Phone is locked with some Austrian carrier
IMEI: 012837004362357
SERIAL: JR127HTNA4S
family: iPhone
product description: IPHONE 4 16GB BLACK
product version: 6.0.X
product sold by: HUTCHISON 3G AUSTRIA GMBH
coverage status: Out Of Warranty (No Coverage)
purchase date: 08/06/11
purchased in: Austria
mac address: 50EAD61BDDCB
country code: ()
locked: yes
activated: no
first activation date: 01-01-1970 01:00:00
last activation date: 01-01-1970 01:00:00
initial activation policy: 323 (Austria Hutchison.)
applied activation policy: ()
next tether policy: 323 (Austria Hutchison.)
Read more at iphone carrier check free for all - Page 6 - IMEI Source
and more info on current status:
DeviceName: GIO
DeviceClass: iPhone
ProductType: iPhone3,1
ProductVersion: 4.3.3
SerialNumber: JR127HTNA4S
UniqueDeviceID: 3c9aadb4afafd98ed63877ea66f66dce786cd451
ModelNumber: MC603
BuildVersion: 8J2
HardwareModel: N90AP
DeviceColor: black
RegionInfo: FD/A
CPUArchitecture: armv7
WiFiAddress: 50:ea:d6:1b:dd:cb
BluetoothAddress: 50:ea:d6:1b:dd:ca
PartitionType: GUID_partition_scheme
FirmwareVersion: iBoot-1072.61
ActivationState: FactoryActivated
BasebandVersion: 04.12.02
BasebandBootloaderVersion: ICE_2_13
BasebandChipId: 80
BasebandGoldCertId: 257
ICCID: 8938101120719215458
IMEI: 012837004362357
IMSI: 001012003612165
MLBSerialNumber: J51267MYGDPMH
MobileSubscriberCountryCode: 001
MobileSubscriberNetworkCode: 01
PasswordProtected: False
ProductionSOC: True
ProtocolVersion: 2
SDIOProductInfo: P=N90 m=3.1 V=u
SIMStatus: kCTSIMSupportSIMStatusReady
SupportedDeviceFamilies: 1
TimeIntervalSince1970: 1353638278
TimeZone: Europe/Belgrade
TimeZoneOffsetFromUTC: 3600
UniqueChipID: 3573414550861
Uses24HourClock: False
Keyboard: en_US
BatteryIsCharging: False
BatteryCurrentCapacity: 98
Region: LI
Label: iPhone 4 GSM (16GB) Black
Description: iPhone 4
Contact: http://www.apple.com/support/contact/phone_contacts.html
in advance, THANK YOU
Answered: post yours iphones software problems ..
install ipad bessbend from redsn0w.... your problem solved broasasdsd
install ipad bessbend from redsn0w.... your problem solved broasasdsd
Answered: post yours iphones software problems ..
just follow setup by setup
1. download redsn0w from here www.mediafire.com/?zjgu7j1i74esqba
2.extract resn0w via winrar
3.open redsn0w
4.click on browse and select your iphone firmware(4.1)
5.you got massage click yes and check this massage IPSW successfully identified
6. click NEXT
7.click on install ipad baseband and also untick install cydia option
8.then click on NEXT then YES and again NEXT and use the following instruction to enter DFU mode.......
9.and wait its may b take few sec/min
you are done
just follow setup by setup
1. download redsn0w from here www.mediafire.com/?zjgu7j1i74esqba
2.extract resn0w via winrar
3.open redsn0w
4.click on browse and select your iphone firmware(4.1)
5.you got massage click yes and check this massage IPSW successfully identified
6. click NEXT
7.click on install ipad baseband and also untick install cydia option
8.then click on NEXT then YES and again NEXT and use the following instruction to enter DFU mode.......
9.and wait
its may b take few sec/minyou are done