[Post here your Success Stories with FENIX KEY ]

J

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
Lets put in this thread all our success stories with Fenix key.
In this all can find easy already done phones with this evolutionary Dongle by Lavarow Team.

2730 - RM-578 Flashed ok in dead mode.
FENIX.jpg

fenix2.jpg




Code: 
Software version: 0.9.6
Detected card sn: XXXXXXXXXXXX
Card version: 00.04
Life counter: 95.85%
Looking for flash files
Flash files found for selected product
Flashing started
PLEASE PRESS PHONE`S POWER BUTTON
Extracting loaders from flash file
Sending 2ND
Sending Algo
Sending Pasubtoc
Reconnecting
Loader is alive!
Checking software version
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 000006BF
Erasing CMT area 000006C0 - 0001FFFF
Erasing CMT area 00040000 - 000BFFFF
Erasing CMT area 000C0000 - 0013FFFF
Erasing CMT area 00140000 - 0155FFFF
Erasing CMT area 01560000 - 0175FFFF
Erasing PPM Flash area
Erasing CMT area 01760000 - 01FFFFFF
Erasing CNT Flash area
Erasing CMT area 02000000 - 0245FFFF
Erasing CMT area 02460000 - 03FBFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
2 seconds delay between flash files
Flashing PPM
2 seconds delay between flash files
Flashing CNT
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code: 0592495
Setting NORMAL MODE
Job's finished successfully! 
  Best Regards
RotelcaM
 
J

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
C5-00 RM-645 flashed ok.
Software version: 0.9.6
Detected card sn: C95XXXXXXXXX
Card version: 00.04
Life counter: 96.29%
Looking for flash files
Flash files found for selected product
Flashing started
PLEASE PRESS PHONE`S POWER BUTTON
CMT Hash : 916F75217F32081248B15C38DFC8E81B
CMT Hw ID: 600C192102031104
Preparing bootstrap to use USB BootMedia
Sending RAW 2ND
Sending RAW ALGO
Reconnecting
Loader is alive!
Reading certificates
Reading NPC
Saving NPC
Reading VARIANT
VARIANT is empty
Reading CCC
Saving CCC
Reading HWC
Saving HWC
Certificates saved as: C:\Documents and Settings\Roland\My Documents\Lavarow\Fenix\Backup\Certs\12-10-2010 9-37-12 AM000000030000022600010007600C192102031104-12-10-2010 9-37-12 AM.rpl
Checking software version
Partitioning file: rm645_032.010_prd.core.fpsx
Erasing MCUSW Flash area
Erasing CMT area 00020000 - 0003FFFF
Erasing CMT area 00060000 - 004DFFFF
Erasing CMT area 008E0000 - 0AE3FFFF
Erasing CMT partition
Erasing PPM Flash area
Erasing CMT area 06D40000 - 0A03FFFF
Erasing CNT Flash area
Erasing CMT area 004E0000 - 008DFFFF
Erasing CMT area 0AE40000 - 0F63FFFF
Erasing CMT area 0A040000 - 0AE3FFFF
Flashing MCUSW
Sending ADA
Sending KEYS
Sending PRIMAPP
Sending RAP3NAND
Sending SOS+PMML
Sending PASUBTOC
MCU PAPUBKEYS are missing, sending first available block
Sending PAPUBKEYS
Sending GENIO_INIT
Sending SOS*UPDAPP
Sending SOS*DSP0
Sending LDSP
Sending SOS*ISASW
Sending SOS+CORE
Sending SOS+ROFS1
2 seconds delay between flash files
Flashing PPM
Sending SOS+ROFS2
2 seconds delay between flash files
Flashing CNT
Sending SOS*ENO
Flashing additional files
Flashing rm645_032.010_U000.000_prd.uda.fpsx
2 seconds delay between flash files
Flashing rm645_032.010_C00.01_DEFAULT_prd.rofs3.fpsx
Sending SOS+ROFS3
2 seconds delay between flash files
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code: 0593618
Setting NORMAL MODE
Job's finished successfully!
moz-screenshot.png
Click to expand...




Fenixlogo.jpg
​
 
J

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
6131 Flasheo en Normal Mode
***************************

Flashing started
PLEASE PRESS PHONE`S POWER BUTTON
Aborting job... Software will abort the job as soon as possible and it might take a while.
Job has been aborted by user!
Flashing started
Battery voltage: 3788mV
Reading important PM fields
Field received. ID = 308
PM backup saved as: D:\Documents and Settings\Administrador\Mis documentos\Lavarow\Fenix\Backup\Pm\358987012945438-12-11-2010 06-45-04 p.m..pm
CMT Flash: SPANSION - Unknown product
Extracting loaders from flash files
Sending CMT loader
Reconnecting
Loader is alive!
Checking software version
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 000006BF
Erasing CMT area 000006C0 - 0001FFFF
Erasing CMT area 00020000 - 0007FFFF
Erasing CMT area 00080000 - 000DFFFF
Erasing CMT area 00100000 - 001FFFFF
Erasing CMT area 00200000 - 002DFFFF
Erasing CMT area 002E0000 - 00EDFFFF
Erasing CMT area 00EE0000 - 00EF7FFF
Erasing CMT area 00EF8000 - 00EFFFFF
Erasing PPM Flash area
Erasing CMT area 00F00000 - 0145FFFF
Erasing CNT Flash area
Erasing CMT area 01460000 - 01FDFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
Sending PMM_CONF
Sending SBIF_CONF
2 seconds delay between flash files
Flashing PPM
2 seconds delay between flash files
Converting CNT 64kb-page file to 128kb-page file
Flashing CNT
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code: 0515124
Setting NORMAL MODE
Job's finished successfully!
Reading phone info
Product type: RM-115
MCU SW Version:
V 06.60
30-07-07
RM-115
© Nokia.
PPM Version:
V 06.60
30-07-07
RM-115
© Nokia.
C
Content Pack Version:
Content: tmo_de2
V 06.60
30-07-07
RM-115
© Nokia.
Imei: 358987012945438
Product code: 0515124
Simlock status:
Profile bits: 0000000000000000
Config key: 7223100000000000
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 72 23 1F
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 2:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 72 23 1F
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 3:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 72 23 1F
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 4:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 72 23 1F
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 5:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 72 23 1F
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 6:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 72 23 1F
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Block 7:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 72 23 1F
Lock 2: OPEN(GID1); TYPE: 1; DATA: FF FF
Lock 3: OPEN(GID2); TYPE: 1; DATA: FF FF
Lock 4: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF
Lock 5: OPEN(IMSI); TYPE: 5; DATA: FF FF FF FF FF FF FF FF

Looking for flash files
Flash files found for selected product
Job's finished successfully!



And Testing
 
J

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
Nokia 3600 - Really DEAD

http://www.4shared.c...ad_process.html


PLEASE PRESS PHONE`S POWER BUTTON
Communication error
Job's finished with errors!
No phone found
Flashing started
PLEASE PRESS PHONE`S POWER BUTTON
Extracting loaders from flash file
Sending 2ND
Sending Algo
Sending Pasubtoc
Reconnecting
Loader is alive!
Checking software version
Erasing MCUSW Flash area
Erasing CMT area 00000000 - 000006BF
Erasing CMT area 000006C0 - 0001FFFF
Erasing CMT area 00040000 - 000BFFFF
Erasing CMT area 000C0000 - 0013FFFF
Erasing CMT area 00140000 - 014DFFFF
Erasing CMT area 014E0000 - 0167FFFF
Erasing PPM Flash area
Erasing CMT area 01680000 - 01F1FFFF
Erasing CNT Flash area
Erasing CMT area 01F20000 - 022BFFFF
Erasing CMT area 022C0000 - 03FBFFFF
Flashing MCUSW
Sending NOLO
Sending KEYS
Sending PRIMAPP
Sending PASUBTOC
Sending PAPUBKEYS
Sending UPDAPP
Sending DSP0
Sending MCUSW
2 seconds delay between flash files
Flashing PPM
2 seconds delay between flash files
Flashing CNT
Finishing loader session...
Switching on device..
Doing post - flashing procedures
Setting defaults: Set Factory
Setting product code: 0575158
Setting NORMAL MODE
Job's finished successfully!
Reading phone info
Product type: RM-352
MCU SW Version:
V 07.23
17-07-09
RM-352
© Nokia
PPM Version:
V 07.23
17-07-09
RM-352
© Nokia
L
Content Pack Version:
Content: l_brazil_dark_red
V 07.23
17-07-09
RM-352
© Nokia
Imei: 356414022825643
Product code: 0575158
Simlock status:
Profile bits: 8000000000000000
Config key: 7223100000000000
Fbus codes typed: 0
Key codes typed: 0
Block 1:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 72 23 10

Block 2:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 74 81 0F

Block 3:
Lock 1: CLOSED(IMSI); TYPE: 5; DATA: 74 40 2F

Looking for flash files
Flash files found for selected product
Job's finished successfully!


******************************************
user code

Setting default user code
Setting full factory defaults
User code is set to 12345 now
Job's finished successfully!
 
You must log in or register to reply here.
Prev Thread | Next Thread
Back
Top