nokia E5 dead set revive by new release HWK ver 2.2.0.0 usb interface (installer ins)

[Laruae]

share ko lang at prove na tested ang new release HWK new ver 2.2.0.0 flashing usb interface ..

unit: nokia E5
problem: dead set vibrate only

tools : tornado with hwk chip ver 2.2.0.0

here same logs and screen shot.

Insert USB Cable to Switched OFF Phone and Power ON USB BOOT : 60,07 [Rm-632] [2.2.0.0] CMT ASICID: 000000030000022600010007600C192102031104 EM 1 ID : 00000C35 EM 2 ID : 00000C30 CMT PUBID : 09400211B4A40344ED8B45B9810BE04B72CF7EF8 CMT MODE : 00 CMT HASH : 916F75217F32081248B15C38DFC8E81B CMT ROMID : E693EF0DAC22615B CMT 2ND Bt: RAPUv11_2nd.fg, Ver: 11.16.0 CMT 2ND Bt: SILO OK CMT RMID0 : 00000000-00000000 CMT MCID0 : FFFF0000-00000000 CMT FLID0 : 00EC0050-00000031, Sam OneNAND-4G CMT RQALG : XSR 1.6 CMT 2ND Boot OK CMT ALGO : RAPUv11_XSR17_alg.fg, Ver: 11.16.0 CMT KSIG0 : CCD9F80559BA50D9B3E274F9E7120BE1EE4EEA7C CMT ALG Boot OK IMAGE : rm632_042.007_prd.core.fpsx CMT NAND Erase Area: 0x00020000-0003FFFF CMT NAND Erase Area: 0x00060000-004DFFFF CMT NAND Erase Area: 0x008E0000-0E77FFFF CMT NAND Partition Format CMT FLASH ERASE OK, Time: 00:03 Written: 14 Certificate(s) CMT FLASH WRITE OK, Time: 00:22 IMAGE : rm632_042.007_U005.000_prd.uda.fpsx CMT NAND Erase Area: 0x0E780000-1F13FFFF CNT FLASH ERASE OK, Time: 00:01 CNT FLASH WRITE OK, Time: 00:05 IMAGE : rm632_042.007_33.01_APAC_QW1_prd.rofs2.fpsx CMT NAND Erase Area: 0x08980000-0D0FFFFF PPM FLASH ERASE OK, Time: 00:00 Written: 1 Certificate(s) PPM FLASH WRITE OK, Time: 00:13 IMAGE : rm632_042.007_C00.01_DEFAULT_prd.rofs3.fpsx CMT NAND Erase Area: 0x0D100000-0E77FFFF CUS FLASH ERASE OK, Time: 00:00 Written: 1 Certificate(s) CUS FLASH WRITE OK, Time: 00:01 Flashing Completed, Rebooting Mobile

done set.



media fire link: new hwk setup and suport.



=DOWNLOD=

WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.

Please make sure you un-install all old versions, first HWK Suite, then HWK Support Suite, you can then install the new software, first HWK Support Suite and then HWK Suite.

You MUST update your HWK using client 2.2.0.0, old client versions will no longer work.

You MUST be running HWK software 2.2.0.0 to access support.

DCTxBB5 V 2.2.0.0 ------------------ 1. BB5 products: RM-576,RM-577 (6700s,6700s-1c) added. 2. Local RPL Service Fixed for ASIC 2,5,6,7,11 (UEM_PASW is Correct now) Note: Need Confirm [Readout and Use UEM IMEI] when do [Rd UEM]. 3. [Check Ask/Rpl] Renamed to [Calc Ask/Rpl] as can Calculate RPL now. 4. [Calc Ask/Rpl] Function will Generate Real RPL from ASK file (ASIC 2,5,6,7,11) Note: When Reading UEM, do not Forget Set Right [UEM Changed] Status ! 5. RSA Lock/Unlock for All DCT4+ products (not need Patch) 6. Life Timer added to [PM Edit] 7. DCT4 INFINEON Based Products USB Flashing / UI support added: RH-111,RH-125,RH-126,RM-607,RM-608,RM-643,RM-644,RM-647,RM-653, RM-669,RM-689,RM-704,RM-732,RM-733 (1202,1616-2,1616-2b,C1-01,C1-01.1, C1-02,C1-02.1,1280,1800,1800b,C1-00,C2-00,X1-00,X1-00.1) 8. BB5 RAP3Gv40 Based Products USB Flashing / UI support added: RM-509,RM-510,RM-511,RM-540,RM-598,RM-604,RM-615,RM-638,RM-721,RM-722 (3710a-1,3710a-1c,3711a-1,X3-00,7230-1c,7230-1,5330-1d,6303ci,C2-01,C2-01.5) 9. BB5 RAPU Based Products USB Flashing / UI support added: RM-582,RM-596,RM-601,RM-609,RM-610,RM-627,RM-629,RM-632,RM-634, RM-639,RM-640,RM-645,RM-648,RM-658,RM-659,RM-662,RM-675,RM-682, RM-688,RM-691,RM-697,RM-699,RM-707,RM-718,RM-719,RM-720,RM-749 (Vertu CQ,N8-00,C6-01,E6-00,E6-00.1,X5-01,5230-1d,E5-00,E5-00.2,X3-02,C3-01, C5-00.X5-01.2,E73,X7-00.1,C3-01m,C7-00,6702s,C5-00.1,C7-00b,C5-03,E5-00m, X7-00,C6-01.3,C5-03.2,C5-04.1,C7-00s) 10.BB5 RAPIDO Based Products USB Flashing / UI support added: RM-484,RM-485,RM-486,RM-551,RM-552,RM-559,RM-588,RM-593,RM-594, RM-612,RM-624,RM-625,RM-684 (N86-1,N86-3,N86-5,X6-00.1,X6-00m,X6-00,5230-1,5230-1c,5230-1b,C6-00, C6-00.1,5288,5250) 11.BB5 JUNO (BCM21351) Based Products USB Flashing / UI support added: RM-497,RM-586,RM-614,RM-618,RM-709,RM717 (7020a-2,2710c-2,C3-00,X2-00,X2-01,X2-01.1) 12.Original SX4 Card Support Added (Use Any PCSC Compatible Card Reader) LG_GSM v 2.2.0.0 ----------------- 1. Infineon: A110,A130,A133,A133GO,A170,A180,C100,C105,C300,C30 0GO,C305, C310,GB220,GB220nGO,GB230,GB280,GD350,GD510,GD510N ,GM360, GM360i,GM600,GS170,GS290,GS290GO,GS290N,GS390GO,GS 500,GS500g, GS500gx,GS500v,GT350,GT350GO,GT350i,GT360,GT365,GU 220,GU230, KC550,KC550d,KF510,KF510d,KF600,KF600d,KM380,KM380 c,KM380d, KM385d,KM386c,KP500,KP500N,KP501,KP502,KP502GO,KP5 05,KP550, KP570q,KS360,KS365,T300,T310,T310i,T310N,T315,T315 i,T320, T320e,T320g,T325 added. Notes: 1. To See Unlock Codes and Instructions, Press [BOOT] 2. To Flash Dead Phones, Tick [Emerg. Boot] 3. FLS and BIN files supported for Flashing. 2. USB Support for Infineon SGOLD3, SGOLDRADIO, XGOLD213. Note: To use USB Select USB in [Baud] ComboBox. 3. ADI: G210,G220,G232,G233,G259,G262,G263,G610,G622,G632, G635, G639,G660,G672,G677,C682,G688,G810,G822,G828,G912, GM200,GM205, GM205GO,GM210,KF245,KG296,LG8930,MG235,MG295,MG296 added. 4. TI: C1300i,C2000,G850,L1400i,MG191a,MG191b,MG200c,MG20 0d added. 5. MTK: A120,A155,A160,A165,GB160a,GB160b,GB161,GB190a,GB2 70, GS190,GS200,GS205 added. 6. BT Address Write Added for ADI, Infineon and MTK platforms. SAMs V 2.2.0.0 --------------- TRIDENT A127,i626,T719,X475 added (DUNL,IM,FL) OM(SYSOL) T209,T319 added (DUNL,IM,FL,SECT) SWIFT A436,A437,A516,A517,T229,T249,T339,T349-LTA-USA,T369, T409,T619,T739 added (DUNL,IM,SECT,FL) Added Multi Drive support for TFS Read. Fixed SLAVE Boot Bug on some models (D980,D980F,D988) TFS Extractor and TFS Builder added, Allows to Edit TFS files. SWIFT-AEROFONE Added [Patch MSL] Function to Patch without MCU Part Flashing. C3300i,T109,T119 added (DUNL,IM,FL) E1050,E1055G,E1055T,E1080F-IND-MEA-SEA,E1080W, E1081T-EU-IND-MEA-SEA,E1083C,E1085F,E1085F-MEA,E1087T,E1105F, E1150i,E1160i,E1170i,E1170T,E1172,E1175T-EU-IND,E1178,E1225F, E1225T,E1225T-IND,E2121L added (PUNL,PIM,FL) Notes: 1.Mixing of EU IND MEA SEA Files causes Blinking or Dead Sets. 2.E1081T EU E2P Image is not Compatible with IND, MEA or SEA. 3.For Cross Flashing Select Model Name Extension by File type. 4.Before Unlock, Info to see Codes or Rebuild IMEI use [Patch MSL] Button or Flash with [Patch MSL] Option Enabled. C3222,C3222W added (DUNL,CUNL) Note: C3222 Flashing not Supported yet, use Original Flasher. TFS Extractor and TFS Builder added, Allows to Edit TFS files. SWIFT-3G C5010E,E3210 added (CUNL,SECT,FL) QUALCOMM A597,A847,A927,B2710D,C5180,S5520,S5580,S6700T,S68 88,T359,T479, T746,T749 added. More Versions Support of Hidden Sysinfo models CUNL and UNFR: A597,A706,A707,A717,A727,A847,A887,A897,A927,B2710 ,B2710D,S3370, S5530,T359,T469,T479,T559,T659,T746,T749 QUALCOMM+LSI S8500B,S8530 added (FL) BROADCOM S5230N added (FL,CUNL,UNFR,BRP) S3850,S5260,S5263,S5330L,S5560i,S5750E,S5753E,S723 0B,S7230E, S7230W,S7233E added (FL) S5250,S5253,S5330,S5330L,S5333 Boot Repair (BRP) [QCDI Info] Renamed to [BCMBL Info] for BroadCom Models. INFINEON B3310i,C3200,C3200G,C3200L,C3530,C3530L,E2230,E223 0M,E2232, E2330,E2330B,E2330C,E2530,E2652,E2652W,S3310i,S335 0,S3353, S3550,S3550C,S3550L added (CUNL,PUNL,PIM,FL,UFL) Note: for USB Flashing select 'USB0' in [BaudRate] box. E1151, Now Possible to Flash Read BIN Dump (Size: 007F0000)