obidulmomin
Junior Member
- Joined
- Feb 27, 2012
- Posts
- 16
- Likes
- 0
I have a nokia 6500s.
first it was headphone conect error.
sometime it connect or missed.
i jumperd the headphone line as......( in attached file )
.....with a wrong process.
then it was 25% sort in power supply.
i removed all jumpers soon.
but my phone was dead.
in this situation ,phone cant start normally.
but it is a strange system that,
when i hold power key without battery and then i plug battery later it always starts well.
but when i plug charger it HANG AND always turns off.
it cant boot with any flasher box.
i have tried with mx key but failed alltime.
here is the log of mx key....
MXKEY [MxKey Team HTI PLUS Flasher Interface 1], SN: C087094D
Using device: HTI, FW ver: 00.50, SN: 01005481
Connection status: UHCI:HUB:USB 2.00 (Full-speed)
Driver: WinUSB, ver: 3.5.1.0
Module ver: 1.0.0.21200(18-07-2012), Library ver: 1.0.0.14205(18-07-2012)
ERROR: Packet Error(0xAA), code 0xC0000002
ERROR: Packet Error(0xAA), code 0xC0000002
Error details:
Bad contact, TX line remains low !
VCC_PH BSI TX RX RX2 CLK
1 0 0 1 1 0
ERROR: bootstrap failed!
then i have tried with jaf+pkey , also failed to boot.
here is the log of jaf...
Detected PKEY: 90009EEC
Card life counter: 99.99%
P-key nokia module version 01.02
Detected JAF INTERFACE version: 01.B1, Driver version: 40000, Library version: 30112
JAF DCT4/BB5 LOADERS DIR: C:\Program Files\ODEON\JAF\Flash\
JAF DCT4/BB5 PRODUCT DIR: C:\Program Files\Nokia\Phoenix\Products\
JAF USB LOADERS DIR: C:\Program Files\ODEON\JAF\FlashUSB\
JAF DCT3/DCTL LOADERS DIR: C:\Program Files\ODEON\JAF\Flash3\
USB Cable Driver version: 7.1.29.0
Changing mode...Done!
Booting phone...
Error sync the phone...
WHAT CAN I DO NOW?