Nokia 5130c downgrade successfully done(see video)

Lawra

Lawra

Well-known Member
Staff member
Joined
Jul 16, 2011
Posts
1,353
Likes
7
5130c downgrade successfully done.rar - 4shared.com - online file sharing and storage - download


before downgrade V 07.97
after downgrade V 07.95

Reading Phone Info....
Connected phone - Nokia 5130c-2
Software ver : V 07.97 13-09-10 RM-495 (c) Nokia
IMEI : 356919035606707
Ape Ver :
APE Var :
APE ADSP:
DSP Ver : ICPR72_10w01
APE Test:
PPM : V 07.97
13-09-10
RM-495
(c) Nokia
MEN
CNT : Content: mena_a1_bd_red
V 07.97
13-09-10
RM-495
(c) Nokia
Product SN : IDS742216
Product code : 0571593
Base Prd.code: 0567772
Module code : 0204024
Long Prod.SN : 0
Hardware info=======
HWID : Error
Retu : 16
Tahvo : 22
Batery: 4601 mV
Camera:
CMT BT: 2222-302
APE BT:
APE HW:
LCDVer: SEIKO
RF ic : 06540601
Lock info ===========
IMEI : 356919035606707
IMEI spNet :
IMEI svNet :

Conf key : 0000000000000000
Provider key : 2440700000000000
Provider : AT&T;U.S.A. (3650)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
User Code : 12345
MMC pwd : no any record found
UserDataExLevel : Full [PhoneBook, Calendar, PWD, SMS, Gallery]

Done!
 
Lawra

Lawra

Well-known Member
Staff member
Joined
Jul 16, 2011
Posts
1,353
Likes
7
Backup Certificates now...
SLx Simlock Data read ... ok
SL3 Simlock Sign read ... ok
WMDRM read ... ok
CRT308 Backup Created
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 1DF0000EEDEF8A56F6774E68B95768A2283F9D62
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1
CMT Algo sent
CMT PAPUB : 0C917F11196FDB7378C18EF7260698CA4489DCA027
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 20480 byte(s)
IMEI : 356919035606707
CMT : Read CCC certificate...
Cert size : 30600 byte(s)
CMT : Read HWC certificate...
Cert size : 20480 byte(s)
CMT : Read VARIANT certificate...
Cert size : 0 byte(s)
Cert Read done!

NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : D:\InfinityBox_install_BEST_v1.30\Backup\Cert\3569 19035606707.rpl

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected , SP_CODE_LEN : 15

Done!

User ACCEPTED FULL ERASE
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 1DF0000EEDEF8A56F6774E68B95768A2283F9D62
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1
CMT Algo sent
CMT PAPUB : 0C917F11196FDB7378C18EF7260698CA4489DCA027
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Full Erase started...
Asic : CMT , Sub : NOR
Erase Area 0x00000000-0x03FFFFFF
Using TimeOut : 10 min ( 600 sec )
Erasing, wait.....
CMT : Erase Ok
Done

Phone disconected!

Connect phone on selected interface...

Core version : 1.30 Rev : 1.1

Selected FlashSettings : Manual
Files Set for Flashing :
MCU : rm495__07.95.mcusw
PPM : rm495__07.95.ppm_mena_b
CNT : rm495__07.95_008.image_b_ctv_ir_v3_76628
Check FlashFiles, Please, wait...
-> SWversion check skipped : Dead mode selected

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0
 
Lawra

Lawra

Well-known Member
Staff member
Joined
Jul 16, 2011
Posts
1,353
Likes
7
CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 1DF0000EEDEF8A56F6774E68B95768A2283F9D62
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT : 000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1
CMT Algo sent
PAPUBkeys blank (erased or HW failure)
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm495__07.95.mcusw
Found 6 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x00000000 - 0x000006BF
CMT , NOR , Area : 0x000006C0 - 0x0001FFFF
CMT , NOR , Area : 0x00040000 - 0x000BFFFF
CMT , NOR , Area : 0x000C0000 - 0x0013FFFF
CMT , NOR , Area : 0x00140000 - 0x0137FFFF
CMT , NOR , Area : 0x01380000 - 0x0151FFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:05
PrReq : NOR , 00
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm495__07.95.mcusw
CMT: Writing Hash CERT [NOLO]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [UPDAPP]
CMT: Writing Hash CERT [DSP0]
CMT: Writing Hash CERT [MCUSW]
Total writen 1169 blocks
TIME : Write time : 00:02:29

PrReq : NOR , 00

Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm495__07.95.ppm_mena_b
Found 1 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01520000 - 0x01DBFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:02
PrReq : NOR , 00
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm495__07.95.ppm_mena_b
Total writen 404 blocks
TIME : Write time : 00:00:49

PrReq : NOR , 00

CNT : Converted to 128k page data exist
Transmission mode : Dual (Ddr, TX2)
Erase : Processing rm495__07.95_008.image_b_ctv_ir_v3_76628_128
Found 2 areas to erase, erase group
Asic : CMT , Sub : NOR
CMT , NOR , Area : 0x01DC0000 - 0x0215FFFF
CMT , NOR , Area : 0x02160000 - 0x03FBFFFF
Using TimeOut : 7 min ( 430 sec )
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:08
PrReq : NOR , 00
Transmission mode : Dual (Ddr, TX2)
Write : Processing rm495__07.95_008.image_b_ctv_ir_v3_76628_128
Total writen 532 blocks
TIME : Write time : 00:01:05

PrReq : NOR , 00


Init Service mode... Wait...

Reading Phone Info....
Connected phone - Nokia 5130c-2
Software Info: V 07.95
03-02-10
RM-495
(c) Nokia
IMEI: 12345610654321?
Product code:
Checking...
SimLock status : SimLock is Ok
Security status : Security is Ok
Read Info Done!
Settings After Flash Defaults...
FullFactorySet...OK!
ProductTuneSet...OK!
SwUpgradeSet...OK!
Checking User Certificates...
Total - 0 certs
Uploading certificates...
Writen 21 certs!
AfterFlash operations done ;D
Connect phone on selected interface...

Connect phone on selected interface...
 
Lawra

Lawra

Well-known Member
Staff member
Joined
Jul 16, 2011
Posts
1,353
Likes
7
Phone found!
Series 40 Device detected!
read info... - Ok

Will Write RPL keys now...
Check RPL file...
NPC Data found! (CMT)
CCC Data found! (CMT)
HWC Data found! (CMT)
SimLock Data found!
SimLock key found!
WMDRM key found!
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 1DF0000EEDEF8A56F6774E68B95768A2283F9D62
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
Use : RAP3Gv3_2nd.fg , Rev : 0.0 Ver : 10.42.0
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 89820089 , CMT , NOR
CMT Flash ID : 89820089 < INTEL => 0046L0Y1GG/NU48F512
FLCNT : 00000000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAP3Gv3_algo_v1331.fg , Rev : 0.0 Ver : 1.33.1
CMT Algo sent
CMT PAPUB : 0C917F11196FDB7378C18EF7260698CA4489DCA027
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Preparing for write certificates...

Switching to CMT...

CMT : NPC erase Ok
Writing NPC... Ok

CMT : CCC erase Ok
Writing CCC... Ok

Erase CRT FL error! Conection lost
frown.gif

ERR : 00000000000000
Writing HWC... Ok


Init Service mode... Wait...

Check phone mode...
Phone already in Test mode, skip change...

Writing SimLock Key... Ok!
Writing SimLock Data... Ok!

SDD Key status : SDData Damaged!!!!!
frown.gif

SimLock status : SimLock is Ok
Security status : Security is Ok


Done!

Connect phone on selected interface...

Phone found!
Series 40 Device detected!
read info... - Ok

Repair SD procedure started...

Phone Imei: 356919035606707
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006030C192101033000
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 1DF0000EEDEF8A56F6774E68B95768A2283F9D62
CMT MODE ID : 00
CMT R_HASH : 9DDBFCFE6E73CED7D8C6268C8EB85723
CMT ROM ID : 273F6D55DFAAF68F

CMT : Sending 2nd loader...
CMT Loader sent, Boot Ok
rap= 1DF0000EEDEF8A56F6774E68B95768A2283F9D62
hash= 9DDBFCFE6E73CED7D8C6268C8EB85723
key= 5AD307121615B25F06EDD0D4AFFE4CDC6928D6F0

Init Service mode... Wait...

Key file updated...
Check phone mode...
Phone already in Test mode, skip change...
Writing Super Dongle Key... Ok
Done!

Local SX4 procedure started...

Phone Imei: 356919035606707
Key file exists, no need to read...
Step 1...
Step 2...
Step 3...
SX4 Auth - Ok
Upload PM checked
Uploading RF/Battery tune to phone...
Using : RM-495.pm
Operating mode is OK, no need change..
 
Lawra

Lawra

Well-known Member
Staff member
Joined
Jul 16, 2011
Posts
1,353
Likes
7
Field 1
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 3 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 6 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 9 write - Ok
Record 10 write - Ok
Record 11 write - Ok
Record 12 write - Ok
Record 13 write - Ok
Record 14 write - Ok
Record 15 write - Ok
Record 16 write - Ok
Record 17 write - Ok
Record 19 write - Ok
Record 20 write - Ok
Field 309
Record 0 write - Ok
Record 1 write - Ok
Record 2 write - Ok
Record 4 write - Ok
Record 5 write - Ok
Record 7 write - Ok
Record 8 write - Ok
Record 17 write - Ok
Record 22 write - Ok

Check ST_SECURITY now...
Security status : ST_SECURITY => OK

Done!

Elapsed: 00:00:02

Upload done

Checking StartUp data ...
-----------------------
SDD Key status : SDData is Ok
SimLock status : SimLock is Ok
Security status : Security is Ok
-----------------------

PA_SimLock Version :
PA_SL3 phone detected , SP_CODE_LEN : 15

Done!
 
You must log in or register to reply here.
Prev Thread | Next Thread
Back
Top