nokia 3230 phone start-up failed help me

R

Ruba

Well-known Member
Joined
Dec 4, 2012
Posts
751
Likes
12
flash ok but showing this error


1st Boot: Ok, WD2, UPP: 1081 [Rm-51] [2.2.0.3]
2nd Boot: w3_2nd.fia, Ver: 4.76.0
Fl0: 0x00000000-0x01FFFFFF,00ECDDFE,Sam K8S5615ETA
Fl1: 0x02000000-0x03FFFFFF,00ECEEFE,Sam K8S5615ETB
Fl2: 0x04000000-0x047FFFFF,00EC2250,Sam K8S6415ETB
Algorithm: w3_amd_b.fia, Ver: 4.76.0
Algorithm Ok, MSID: 843B1EE5BA0D36D4B011527DB9
Decoded MSID: 3E4EBAF7-00D4D074-A8000000
Encoded FAID: 7FA6407C-F6BFB2B1-DA3A7737
IMAGE: RM51PE507170.C1
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x00FFFFFF Erased, Time: 02:09
Area3: 0x02000000-0x02A9FFFF Erased, Time: 01:24
Area4: 0x02FC0000-0x02FEFFFF Erased, Time: 00:01
MCU Flashing Completed, Time: 05:21
IMAGE: RM51PE507170.75
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x02B00000-0x02EFFFFF Erased, Time: 00:31
Area3: 0x04600000-0x0471FFFF Erased, Time: 00:08
PPM Flashing Completed, Time: 01:01
 
poran said:
flash ok but showing this error


1st Boot: Ok, WD2, UPP: 1081 [Rm-51] [2.2.0.3]
2nd Boot: w3_2nd.fia, Ver: 4.76.0
Fl0: 0x00000000-0x01FFFFFF,00ECDDFE,Sam K8S5615ETA
Fl1: 0x02000000-0x03FFFFFF,00ECEEFE,Sam K8S5615ETB
Fl2: 0x04000000-0x047FFFFF,00EC2250,Sam K8S6415ETB
Algorithm: w3_amd_b.fia, Ver: 4.76.0
Algorithm Ok, MSID: 843B1EE5BA0D36D4B011527DB9
Decoded MSID: 3E4EBAF7-00D4D074-A8000000
Encoded FAID: 7FA6407C-F6BFB2B1-DA3A7737
IMAGE: RM51PE507170.C1
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x00FFFFFF Erased, Time: 02:09
Area3: 0x02000000-0x02A9FFFF Erased, Time: 01:24
Area4: 0x02FC0000-0x02FEFFFF Erased, Time: 00:01
MCU Flashing Completed, Time: 05:21
IMAGE: RM51PE507170.75
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x02B00000-0x02EFFFFF Erased, Time: 00:31
Area3: 0x04600000-0x0471FFFF Erased, Time: 00:08
PPM Flashing Completed, Time: 01:01
Click to expand...

can you read?
1.turn phone off
2.press Green+3+*+power on
3.still hold them to see "formating"
4.if not formated use JAF or PBB for format user area
end
 
poran said:
flash ok but showing this error


1st Boot: Ok, WD2, UPP: 1081 [Rm-51] [2.2.0.3]
2nd Boot: w3_2nd.fia, Ver: 4.76.0
Fl0: 0x00000000-0x01FFFFFF,00ECDDFE,Sam K8S5615ETA
Fl1: 0x02000000-0x03FFFFFF,00ECEEFE,Sam K8S5615ETB
Fl2: 0x04000000-0x047FFFFF,00EC2250,Sam K8S6415ETB
Algorithm: w3_amd_b.fia, Ver: 4.76.0
Algorithm Ok, MSID: 843B1EE5BA0D36D4B011527DB9
Decoded MSID: 3E4EBAF7-00D4D074-A8000000
Encoded FAID: 7FA6407C-F6BFB2B1-DA3A7737
IMAGE: RM51PE507170.C1
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x00010000-0x00FFFFFF Erased, Time: 02:09
Area3: 0x02000000-0x02A9FFFF Erased, Time: 01:24
Area4: 0x02FC0000-0x02FEFFFF Erased, Time: 00:01
MCU Flashing Completed, Time: 05:21
IMAGE: RM51PE507170.75
Area1: 0x00000000-0x0000FFFF Erased, Time: 00:00
Area2: 0x02B00000-0x02EFFFFF Erased, Time: 00:31
Area3: 0x04600000-0x0471FFFF Erased, Time: 00:08
PPM Flashing Completed, Time: 01:01
Click to expand...


Use HWK-Box & Click Format user area

Hope ur problem will be solve...
 
You must log in or register to reply here.
Prev Thread | Next Thread
Back
Top