Prof.CYRUS07
Junior Member
- Joined
- Apr 9, 2012
- Posts
- 18
- Likes
- 1
LG_GS190 - Hung On Logo Solved By GPGDragon!
Readflash!
Code:
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6226, HardwareVer:8B02, SoftwareVer:8B01
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC227E22632260
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: GS190-00-V10d-ESA-XX-FEB-09-2010
Changing baudrate to 921600...
Done.
Reading full Flash...
Saved file to:
D:\Chinaphone Backup File\LG_GS190_MT6226M_32MB
All Done.
Code:
Initializing...
DA_LIB_VER_4.3.6.8
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6226, HardwareVer:8B02, SoftwareVer:8B01
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC227E22632260
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: GS190-00-V10d-ESA-XX-FEB-09-2010
Changing baudrate to 921600...
Done.
Formatting Flash...
AutoFormat address: start=0x01000000, size=0x01000000
All Done
Code:
Initializing...
DA_LIB_VER_4.3.6.8
Tip: The phone must be able to power-on normally
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6226, HardwareVer:8B02, SoftwareVer:8B01
Read info...ok, Waitting enter meta...
Connected...can release Power button now, tracking...
[COLOR=Red][B]IMEI=135790246811220[/B][/COLOR][COLOR=Lime][B]
Rebulid IMEI1=357945032459534[/B][/COLOR]
Code:
Initializing...
DA_LIB_VER_4.3.6.8
It is sensing the pinout fast,please hold on the phone Power key
RXD=3 TXD=2
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:[COLOR=Lime][B]6226[/B][/COLOR], HardwareVer:8B02, SoftwareVer:8B01
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00EC227E22632260
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: [COLOR=Lime][B]GS190-00-V10d-ESA-XX-FEB-09-2010[/B][/COLOR]
Changing baudrate to 115200...
Done.
Analysis the file, Some file may need a long time...
The file has not been encrypted.
Downloading Flash file...
[COLOR=Lime][B] All Done.[/B][/COLOR]Back_Up Firmware Uploaded! LG_GS190_MT6226M_32MB.rar