josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
Hello
if you have dead htc with omap850 mcu and the jtag pinout not available this pics maybe help. (You must remove the mcu trace the pins reball the mcu and put back (for advanced users only)).

omap850_pinout.jpg


omap850_package.jpg
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
HTC Herald (P4350, HERA100) Jtag

Hello
here the jtag pinouts if you need to add this phone
regards


herald_jtag.jpg
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
Charmer JTAG and if possible all HTC pinouts same logic

htc_charmer_wiza1.jpg
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
SPV C550 J-tag Pins.

2dbounm.jpg


SPV C550 J-tag pins.

Up
1-NTRST
2-TMS
3-TCK
4-TDO
5-TDI
Down.

Pin are in BLUE-LABEL.
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
The most common handheld GPS mcu(integrated all in one chipset):
SirfAtlasIII pinout an additional infos

SirfAtlasIII.jpg
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
pinout for Samsung F500.

Here is full pinout for Samsung F500:

samsung%20f500%20jtag_gsmcitycomua.jpg


This is another JTAG pinout for Samsung F500 MSM JTAG:

f500_pinout_qualcomm.jpg.resize.jpeg


PS: remember, RIFFbox support only MSM part repair for now.
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
G800 pinout

Working pinout sam g800
usb cable only need

Code:
Open serial port...OK Connecting to the RIFF Box...OK Connecting to the ARM926 target...OK Set I/O Voltage reads as 2.59V, TCK Frequency is RTCK Target ID on TAP0: 0x200C00E1 - Connected OK
Code:
Open serial port...OK Connecting to the RIFF Box...OK Connecting to the target...OK Set I/O Voltage reads as 2.60V, TCK Frequency is RTCK Following devices are found on the JTAG chain: Device on TAP #0: ID = 0x200C00E1, IR Length = 0x04 bits Total IR length: 0x0004 bits

 
Back
Top