How To Update Samsung Galaxy S i9003 To Gingerbread 2.3.4 XXKP9
Firmware Version: I9003XXKP9 Android 2.3.4 Gingerbread
PIT: latona_20110114.pit
Bootloader: APBOOT_I9003XXKP9_CL309731_REV08_eng_mid_ship
PDA: CODE_I9003XXKP9_CL309731_REV08_eng_mid_ship.tar.md 5
MODEM: MODEM_I9003XXKP9_REV_00_CL1027275.tar.md5
CSC: GT-I9003-CSC-MULTI-OXAKP9.tar.md5
Download firmware
Password is: samfirmware.com
1. Download and extract the XXKP9 2.3.4 Gingerbread
2. Run ODIN3 v1.83.exe
3. Click PIT button then select and load the file: latona_20110114.pit
Ensure that the Re-partition, Auto Reboot and F-Reset Time are checked.
4. Boot your Samsung Galaxy I9003 into Download Mode by pressing the Volume down + OK button, then hold Power button. Thenconnect the phone to PC. The ID:COM box will show you an indication if the device is already connected or detected on the PC.
5. Hit the ”START” Button to begin flashing the PIT file.
6. Once finish flashing the PIT file, on ODIN click the “RESET” button. (Re-Partition checkbox will automatically uncheck.)
7. Now load all the needed binary files on ODIN.
Click BOOTLOADER button and select this file: APBOOT_I9003XXKP7_CL280937_REV08_eng_mid_ship
Click PDA button and select this file:
CODE_I9003XXKP7_CL280937_REV08_eng_mid_ship.tar
Click PHONE button and select this file:
MODEM_I9003XXKP7_REV_00_CL1021949.tar
Click CSC button and select this file:
GT-I9003-CSC-MULTI-OXAKP7.tar
Turn OFF the Samsung Galaxy I9003 or remove the battery and reinsert it back again. Then boot the phone into Download Mode again. (Volume Down+Home+Power button).
Hit “START” button to flash the Bootloader, PDA, Phone and CSC files.
Do not touch anything until it finishes, you will see a word “PASS” on ODIN window when it successfully completes.
Then do a Factory reset procedure once the phone reboots..You may then confirm and check your newly installed firmware through your About Phone Settings
Firmware Version: I9003XXKP9 Android 2.3.4 Gingerbread
PIT: latona_20110114.pit
Bootloader: APBOOT_I9003XXKP9_CL309731_REV08_eng_mid_ship
PDA: CODE_I9003XXKP9_CL309731_REV08_eng_mid_ship.tar.md 5
MODEM: MODEM_I9003XXKP9_REV_00_CL1027275.tar.md5
CSC: GT-I9003-CSC-MULTI-OXAKP9.tar.md5
Download firmware
Password is: samfirmware.com
1. Download and extract the XXKP9 2.3.4 Gingerbread
2. Run ODIN3 v1.83.exe
3. Click PIT button then select and load the file: latona_20110114.pit
Ensure that the Re-partition, Auto Reboot and F-Reset Time are checked.
4. Boot your Samsung Galaxy I9003 into Download Mode by pressing the Volume down + OK button, then hold Power button. Thenconnect the phone to PC. The ID:COM box will show you an indication if the device is already connected or detected on the PC.
5. Hit the ”START” Button to begin flashing the PIT file.
6. Once finish flashing the PIT file, on ODIN click the “RESET” button. (Re-Partition checkbox will automatically uncheck.)
7. Now load all the needed binary files on ODIN.
Click BOOTLOADER button and select this file: APBOOT_I9003XXKP7_CL280937_REV08_eng_mid_ship
Click PDA button and select this file:
CODE_I9003XXKP7_CL280937_REV08_eng_mid_ship.tar
Click PHONE button and select this file:
MODEM_I9003XXKP7_REV_00_CL1021949.tar
Click CSC button and select this file:
GT-I9003-CSC-MULTI-OXAKP7.tar
Turn OFF the Samsung Galaxy I9003 or remove the battery and reinsert it back again. Then boot the phone into Download Mode again. (Volume Down+Home+Power button).
Hit “START” button to flash the Bootloader, PDA, Phone and CSC files.
Do not touch anything until it finishes, you will see a word “PASS” on ODIN window when it successfully completes.
Then do a Factory reset procedure once the phone reboots..You may then confirm and check your newly installed firmware through your About Phone Settings