.:::parash:::.

Junior Member
Joined
Sep 2, 2010
Posts
10
Likes
0
What do you need: A jailbroken iPhone that can be activated in iTunes (that is, not officially blacklisted), a computer with the latest iTunes installed and working internet connection. You will also need to know the carrier that your iPhone is locked to.

1. Step one: Install Sam Bingner's SAM (Subscriber Artificial Module) package. I recommend that you get it from repo.bingner.com since older versions have a different interface and may not work for this purpose.


2. Enter SAM by either going through the settings menu or find the SAMPrefs icon on your springboard. You will need to have the SIM card you intend to use in your phone.


3. Go to utilities and select "De-Activate iPhone", your ActivationState under "More Information" should now be "Unactivated"


4. With SAM enabled, choose "By Country and Carrier" in "Method"; find your carrier, for some carriers operating more than one Carrier ID you may need to select "SIM ID"; if you pick the wrong one this won't work.


5. Go to More Information", copy or write down the IMSI in "SAM Details", then tap "Spoof Real SIM to SAM".


6. Go back to the main SAM screen and change your "Method" to manual. Paste or enter the IMSI string we saved in Step 5.


7. Connect your iPhone to your computer and allow iTunes to activate it, double click "Phone Number" parameter at the main device screen and make sure that the ICCID matches that of your SIM card. If not you need to start over from Step 1.





8. Unplug your phone, close iTunes.



9. Disable SAM. The source article says to uninstall SAM and delete your lockdownd profiles; it's unnecessary.

10. Connect your phone to iTunes again, you should get an error saying that your phone cannot be activated. This is normal. Just close iTunes and open it again.


11. You should see signal bars in a short time, congratulations.


12. Push notifications may stop working after this procedure but can be easily restored by "clear push" utility in SAM followed by connecting to iTunes.


Your phone will work normally with your SIM card and that SIM card ONLY since we tricked iTunes to accept that ICCID is one of the intended carrier's. The phone can be rebooted and connected to iTunes freely without losing the "unlock", at least for now.

Since it does not involved emergency numbers and test IMSI it will not have any of the issues associated with SIM interposers. Tested working on iOS 5.01 but should work with tethered 5.1 too.




Note: Personally i never tested it yet but it's confirmed,More detail's will post later
smile.gif
 

.:::parash:::.

Junior Member
Joined
Sep 2, 2010
Posts
10
Likes
0
A little more detail

These are instructions on how to unlock your iPhone using SAM. This method will work with the iPhone 4S, iPhone 4, iPhone 3GS, and iPhone 3G on iOS 5.x.

Step One
Jailbreak your iPhone. You can find instructions on how to do that using the forum Jailbreak Wizard.

Step Two
Tap to launch Cydia from your SpringBoard.


Step Three
Press to select Manage from the tabs at the bottom of the screen.


Step Four
Press the large Sources button.


Step Five
Press the Edit button at the top right of the screen.


Step Six
Press the Add button that appears at the top left of the screen.


Step Seven
Enter http://repo.bingner.com and press the Add Source button.


Step Eight
Press the large Return to Cydia button.


Step Nine
Press to select Bingner from the list of Sources.


Step Ten
Choose SAM from the list of packages.
 

.:::parash:::.

Junior Member
Joined
Sep 2, 2010
Posts
10
Likes
0
A little more detail

Step Eleven
Press the Install button at the top right of the screen.


Step Twelve
Press the Confirm button to begin installation.


Step Thir****
Once installation has completed press the large Restart SpringBoard button.


Step Four****
Insert your new SIM card and tap to select SAMPrefs from your SpringBoard.


Step Fif****
Tap Utilities


Step Six****
Press to select De-Activate iPhone. Your ActivationState under "More Information" should now be "Unactivated"


 

.:::parash:::.

Junior Member
Joined
Sep 2, 2010
Posts
10
Likes
0
A little more detail

Step Seven****
With SAM enabled, tap Method and choose By Country and Carrier.


Step Eigh****
Tap Country and choose the country of your ORIGINAL SIM.


Step Nine****
Tap Carrier and choose your ORIGINAL carrier that your iPhone is locked to.


Step Twenty
For some carriers operating more than one Carrier ID you may need to select SIM ID. If you are unable to activate in Step Twenty Four then you have selected the wrong one.
 

.:::parash:::.

Junior Member
Joined
Sep 2, 2010
Posts
10
Likes
0
A little more detail

Step Twenty One
Tap More Information and copy the IMSI under SAM Details to the clipboard.


Step Twenty Two
Tap Spoof Real SIM to SAM


Step Twenty Three
Go back to the main SAM screen and paste the IMSI number in your clipboard.


Step Twenty Four
Connect your iPhone to the computer and let iTunes reactivate your phone.


"Double click "Phone Number" parameter at the main device screen and make sure that the ICCID matches that of your SIM card." If not you need to start over from Step Four****."

Step Twenty Five
Unplug your iPhone from the computer and close iTunes.

Step Twenty Six
Reopen SAMPrefs from your SpringBoard and disable it using the Enabled switch.
 

.:::parash:::.

Junior Member
Joined
Sep 2, 2010
Posts
10
Likes
0
A little more detail

Step Twenty Seven
Connect your iPhone to the computer and launch iTunes again.


You should get an error saying that your phone cannot be activated. This is normal. Just close iTunes and open it again.


Step Twenty Eight
In a short time you should see signal bars. Congratulations!



IMPORTANT:
If push notifications stop after this process, you can restore then with the Clear Push utility in SAM, followed by connecting to iTunes.

Your phone will work normally with your SIM card and that SIM card ONLY since we have tricked iTunes to think that ICCID is one of the intended carrier's. The phone can be rebooted and connected to iTunes freely without losing the "unlock", at least for now.
 

.:::parash:::.

Junior Member
Joined
Sep 2, 2010
Posts
10
Likes
0
[ DEB Files ] SAM & SAMPrefs and other DEPENDENCIES

9SAM & SAMPrefs and other DEPENDENCIES

= SAM 0.1.14-2
= SAMPrefs 0.1.15-1
= ACUtil 0.0.8-2
= Erica Utilities beta27
= Libpar2 0.2-1
= Libsigc++ 2.2.3-4
= Stockify 0.0.1-1

ISO-8859-1__+SAM+ SAMPrefs
 

moon_sns

Junior Member
Joined
Dec 6, 2010
Posts
19
Likes
1
answer: [ DEB Files ] SAM & SAMPrefs and other DEPENDENCIES

your uploaded method is 100% correct...
finly acording to your method i have got my torget and now i am using pak sim.....thanks again for this method
 

moon_sns

Junior Member
Joined
Dec 6, 2010
Posts
19
Likes
1
answer: A little more detail

your uploaded method is 100% correct...
finly acording to your method i have got my torget and now i am using pak sim.....thanks again for this method
 
Back
Top