How To Read\Flash SPD 6530A Mobile with 2 Flash IC( guide)

[DON M]

How To Read\Flash SPD 6530A Mobile with 2 Flash IC( guide)

Some Mobile CPU SPD SC6530A ,It has 2 Flash IC inside;
in the Software just read first one only,
so after we flash it,it will tip UDISK ERROR or others

cause is we no have Flash All,

before we do this,we must open the Mobile,check the Flash IC,is two or one,
if is two,we need know this two flash IC how big?

like is 16MB+8MB Flash or 16MB+16MB Flash <this Depends on Mobile Flash IC>

first,we need read info with draogn V3 software first
why? read info we can get the flash ID Flash Name and Flash Size(the First Flash IC)

now we open the dragon V3 software system folder like "Dragon < V3.20\system\Flash>"

we get the "Nor_Flash.ini" File

open it,and Hold computer keyboard "CTRL+F".input before we read info the "Flash ID"

Like the pic

we Edit the 0X00800000 to we are need size

tip:0X00800000 is 8MB
0x00C00000 is 12MB (8MB+4MB Flash)
0X01000000 is 16MB (8MB+8MB Flash)
0x02000000 is 32MB (16MB+16MB Flash)

after save it and read flash ,now you will read back all flash

and if you flash this full Flash file,mobile sure working 100%

don't forget after done,you need made back the "Nor_Flash.ini" file,if know,after every time software will read this flash IC size same as you change



if you can't understand this,we will try update the video at 2013-3-25 or later

 

[DON M]

if we don't understand mobile has 2 flash or just one
has one idea without open mobile can know it

read flash done (without change the NOR_Flash.ini)

after select "read password"

if read password get the Mobile IMEI

then we read full flash,and mobile just have one flash IC

if read password,can't get any think,IMEI is empty

then I sure can tell you,Mobile have 2 flash IC in it,you need open mobile or read 32MB Flash

but you read 32MB Flash you need send the flash file to me,then I can help you check mobile Actual capacity and give you good flash