hi all
today i discoursed about Lg-kp500 flashing method (LG FLASH TOOL)
by
MultiGSM_V30
LETS START
Phone : Lg-kp500
Tool: free Lg Flash Tool MultiGSM_V30


Tested Flash File

Required dll file

Process step by step
1.Download Tool and Flash File
2.setup file must be need to do unzip
3.INSTALL THE SOFTWARE AND DRIVERS - DRIVERS WORKS ONLY ON XP WINDOWS
(Don't connect your phone on computer yet)
4.now first instal the main MultiGSM_V30
5.then now need to install driver



again go on



all driver install ok now
6.Remove memory card,sim card,battery
7.connect phone with pc without battery
8.now press power on button
9.now computer open dialog box to install driver
10.install driver manually
11.now see in device manager

12. USBMap PROGRAM
- Run program USBMap_V01 (which can be found in C:\GSMULTI)
- Select INFINEON and then click MAPPING START

-WAIT (about one minute) that USBMAP will find USB port where is the phone connected

- When the port will be found click on (select it) and press SAVE*EXIT
- Run GSMULTI program (shourtcut is in your desktop)
- Check if settings/configuration
- Now its everything ready to start flashing
- Check MODEL and SW VERSION and if that is correct just click START and wait until the program finished

at last see
the result

http://www.youtube.com/watch?v=cL5iXaNZqjc
today i discoursed about Lg-kp500 flashing method (LG FLASH TOOL)
by
MultiGSM_V30
LETS START
Phone : Lg-kp500

Tool: free Lg Flash Tool MultiGSM_V30


Tested Flash File

Required dll file

Process step by step
1.Download Tool and Flash File
2.setup file must be need to do unzip
3.INSTALL THE SOFTWARE AND DRIVERS - DRIVERS WORKS ONLY ON XP WINDOWS
(Don't connect your phone on computer yet)
4.now first instal the main MultiGSM_V30
5.then now need to install driver



again go on



all driver install ok now
6.Remove memory card,sim card,battery
7.connect phone with pc without battery
8.now press power on button
9.now computer open dialog box to install driver
10.install driver manually
11.now see in device manager

12. USBMap PROGRAM
- Run program USBMap_V01 (which can be found in C:\GSMULTI)
- Select INFINEON and then click MAPPING START

-WAIT (about one minute) that USBMAP will find USB port where is the phone connected

- When the port will be found click on (select it) and press SAVE*EXIT
13.MAIN PART - FLASHINGFor those who had problems port mapping...
1) UNPLUG ALL USBs
2) plug ur phone in
3) Click infineon
4) click start mapping
5) wait...something should show up...If nothing shows up...Press (NOT HOLD) the END button on ur phone to turn it on
6) wait again....if something shows up...click save and exit
- Run GSMULTI program (shourtcut is in your desktop)
- Check if settings/configuration


- Now its everything ready to start flashing
- Check MODEL and SW VERSION and if that is correct just click START and wait until the program finished


at last see
the result

http://www.youtube.com/watch?v=cL5iXaNZqjc