addtel c3212 spd cpu 6610(samsung copy)

[Lowers]

addtel c3212 spd cpu 6610(samsung copy)

Scaning Pinouts,Need not press Power-Key...
<<.
D+:6 D-:8 Gnd:2 Spread
Definition Applied
Scanning USB Serial port...
SU2Serial Port: COM12
Connecting to Phone,Wait..
Done.
Infor: Spreadtrum Boot Block version 2.0
Initialize boot10...
CPU type: 6610
Flash type: NOR
Flash ID: 00C80040(00160000)
Flash Model: GD25Q32
Flash Size: 0x400000(4.0M)
reading,Wait...
Read Completed.
>>File save to: C:\Documents and Settings\ADVANTAGE\Desktop\MY TESTED FLASH FILE CHINA MOBILE\6610_GD25Q32.bin addtel c3212 (samsung copy)

screen shot

 

[rakesh00812]

answer: addtel c3212 spd cpu 6610(samsung copy)

plz share flash file

 

[harichintu]

Answered: addtel c3212 spd cpu 6610(samsung copy)

we want flash file addtel c3212 sam copy

 

[DON M]

Answered: addtel c3212 spd cpu 6610(samsung copy)

we want flash file addtel c3212 sam copy

1st make backup file by 'read flash' then try with this file: g'fen 5212 6610_GD25Q32.bin - Download - 4shared

 

[rakesh00812]

sir need forme d518 mtk 8mb flash file
Initializing...
DA_LIB_VER_4.3.6.8
It is sensing the pinout fast,please hold on the phone Power key
RXD=8 TXD=16
Connecting...Please hold on the POWER key until the red gauge is going...
Any errors please select another boot and try again.
BB:6252, HardwareVer:8B00, SoftwareVer:CF00
Loading boot...
INT_SYSRAM_BOOT test completed.
Loading boot...
Boot2 test completed.
Nor Flash ID: 00C8006000170000
Nand Flash ID: 0000000000000000
Read Hardware Information is done.
Config EMI(Nor Flash only)...
H/W detection ok.
Get Project ID from phone...
Project ID: N70.SW.V00.01.YIDALONG

 

[gsmgold_10]

Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast...
D-=8 D+=9
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM14
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000465A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_UNKNOWN
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading Flash...
i need this file please help me