samsung e1282T dead after flashing need help
which box you use post here screen shot
nazeer1988
Newbie
- Joined
- Mar 27, 2013
- Posts
- 1
- Likes
- 0
dragon box
use ufs or z3x box for flashing
bro use ResearchDownloader_REV_2.9.7016 samsung spd official usb flashing tool
Samsung E1282T Flashing Steps:
- Turn off your Samsung E1282T mobile phone and take its battery out.
- From Flasher folder run ResearchDownload.exe program.
- Click on Settings button.
- At the opened window Select SC6530_SAMSUNG from Select Product drop down menu.
- Select 921600 for Bautrate.
- Select the following firmware files from the downloaded flash package:
- For NOR_FDL: nor_fdl.bin
- For NV: nvitem.bin
- For PS: SC6530_sc6530_samsung_EricPlus_stone.bin
- For MMICSC: mmi_res_128x160_csc.bin
- Go to Calibration tab and uncheck them all, Then click OK button.
- Click on Start Downloading button.
- Now put the battery back into your phone.
- Press and Hold OK key on your phone's keypad and connect USB cable to it.
- The program will start the flash process automatically.
- After the program finishes his job, Disconnect USB cabl
Samsung E1282T Flashing Steps:
- Turn off your Samsung E1282T mobile phone and take its battery out.
- From Flasher folder run ResearchDownload.exe program.
- Click on Settings button.
- At the opened window Select SC6530_SAMSUNG from Select Product drop down menu.
- Select 921600 for Bautrate.
- Select the following firmware files from the downloaded flash package:
- For NOR_FDL: nor_fdl.bin
- For NV: nvitem.bin
- For PS: SC6530_sc6530_samsung_EricPlus_stone.bin
- For MMICSC: mmi_res_128x160_csc.bin
- Go to Calibration tab and uncheck them all, Then click OK button.
- Click on Start Downloading button.
- Now put the battery back into your phone.
- Press and Hold OK key on your phone's keypad and connect USB cable to it.
- The program will start the flash process automatically.
- After the program finishes his job, Disconnect USB cabl