Nokia 2700c show only nokia logo after fade screen, pls help me
answer: Nokia 2700c show only nokia logo after fade screen, pls help me
Dear,
Its comes 85% from camera, so 1st remove camera then check thats oky? then resetting camera. then if you see same problem that mean camera problem. just change camera 100% solved.
Otherwise follow step by step guide bellow:
NOKIA 5130c-2690c-2700c Nokia Logo Trun Off Check Solution Step By Step
A1) flash lhe phone higher version via usb or Fbus
2) usb flashing time computer show usb error?
must check usb connector usb controll driver(remove usb esd)
usb flashing and fbus flash 100% done?but phone same nokia logo then trun off?
B1) open handset then check display connector or change display(display also make this problem)
2) remove camera and power on phone with battery,phone still same problem(nokialogo then trun off
3) check vcore,vio,vdram vrfc volt
this 4 volt controlled by combo ic
vdram,vrfc,vio volt controlled by AVILMA
Vcore controlled by BETTY
this 4 volt is prefect???then one thing is conformed avilma betty working fine
visit more hardware solution: http://forum.imeisource.com/
OR
Just rehot this avilma.
Hpre your problem will be solve.
Dear,
Its comes 85% from camera, so 1st remove camera then check thats oky? then resetting camera. then if you see same problem that mean camera problem. just change camera 100% solved.
Otherwise follow step by step guide bellow:
NOKIA 5130c-2690c-2700c Nokia Logo Trun Off Check Solution Step By Step
A1) flash lhe phone higher version via usb or Fbus
2) usb flashing time computer show usb error?
must check usb connector usb controll driver(remove usb esd)
usb flashing and fbus flash 100% done?but phone same nokia logo then trun off?
B1) open handset then check display connector or change display(display also make this problem)
2) remove camera and power on phone with battery,phone still same problem(nokialogo then trun off
3) check vcore,vio,vdram vrfc volt
this 4 volt controlled by combo ic
vdram,vrfc,vio volt controlled by AVILMA
Vcore controlled by BETTY
this 4 volt is prefect???then one thing is conformed avilma betty working fine
visit more hardware solution: http://forum.imeisource.com/
4) reflow or change keypad ic
5) Remove MMC ic
6) BT ic also make this problem(6120 75% nokia trun off bt ic)
7) finaly reflow or change combo ic
Respected viewers if you have any openion please post here its healpfull to all.
ONE SULATION MORE....
only nokia logo hang(5130,2690,2700c ect with light or withouT light) solution tested
first of all flash with latest version if no
then remove camera if no then finally
replace bt ic shown in picture.
visit more hardware solution: http://forum.imeisource.com/
5) Remove MMC ic
6) BT ic also make this problem(6120 75% nokia trun off bt ic)
7) finaly reflow or change combo ic
Respected viewers if you have any openion please post here its healpfull to all.
ONE SULATION MORE....
only nokia logo hang(5130,2690,2700c ect with light or withouT light) solution tested
first of all flash with latest version if no
then remove camera if no then finally
replace bt ic shown in picture.
visit more hardware solution: http://forum.imeisource.com/
OR
Just rehot this avilma.
Hpre your problem will be solve.
answer: Nokia 2700c show only nokia logo after fade screen, pls help me
r tried rehot double ic?
faiyazthedon1
Newbie
- Joined
- May 8, 2012
- Posts
- 4
- Likes
- 0
answer: Nokia 2700c show only nokia logo after fade screen, pls help me
hai guys i am try this one but no use any other sulation please tell me what i do
hai guys i am try this one but no use any other sulation please tell me what i do
answer: Nokia 2700c show only nokia logo after fade screen, pls help me
100% working solutionsdcb
Dear,
Its comes 85% from camera, so 1st remove camera then check thats oky? then resetting camera. then if you see same problem that mean camera problem. just change camera 100% solved.
Otherwise follow step by step guide bellow:
NOKIA 5130c-2690c-2700c Nokia Logo Trun Off Check Solution Step By Step
A1) flash lhe phone higher version via usb or Fbus
2) usb flashing time computer show usb error?
must check usb connector usb controll driver(remove usb esd)
usb flashing and fbus flash 100% done?but phone same nokia logo then trun off?
B1) open handset then check display connector or change display(display also make this problem)
2) remove camera and power on phone with battery,phone still same problem(nokialogo then trun off
3) check vcore,vio,vdram vrfc volt
this 4 volt controlled by combo ic
vdram,vrfc,vio volt controlled by AVILMA
Vcore controlled by BETTY
this 4 volt is prefect???then one thing is conformed avilma betty working fine
visit more hardware solution: http://forum.imeisource.com/
4) reflow or change keypad ic
5) Remove MMC ic
6) BT ic also make this problem(6120 75% nokia trun off bt ic)
7) finaly reflow or change combo ic
Respected viewers if you have any openion please post here its healpfull to all.
ONE SULATION MORE....
only nokia logo hang(5130,2690,2700c ect with light or withouT light) solution tested
first of all flash with latest version if no
then remove camera if no then finally
replace bt ic shown in picture.
visit more hardware solution: http://forum.imeisource.com/
OR
Just rehot this avilma.
Hpre your problem will be solve.
100% working solutionsdcb