Mstar Pinfind Important information<Can't Pinfind check here>

[New Vision]

China Mobile Repair Worker tell me he very headache for Mstar Pinfind

Have any New way to do it?


1.You Must Update Your Box firmware Update
Download in Server
Download Main Software

2.If IQ-DOCTOR BOX UPDATER V1.57 also Can't Pinfind
Now you need Check Your Cable,Like V3 5Pin Cable You can't Use V3 10 pin cable

3,after Check can sure ,"Yes ,my cable no select error"
Now We can check ,maybe I hold the camera after click the Start it will Pinfind

4.before 3 way Can't help me,Now you need IQ Doctor Update Main Software main Software

Click the Charge Pin,In the Charge Pin windows,
Click "External Connector Info"
Now We need a example
P-05B connect
After "External Connector Info"
we can see short pin is 2;3
and 1 pin is VCC 5 pin is gnd,4 pin is signal pin
Now we go to Setpinout Windows
Set 1=VCC,2=USD+,3=USD-,4=Low level,5=GND

Why need this?
in mstar Mobile(more than 95%)
the D+ and D- in charge it short pin
and the Less pin is D+(Like 6<8)
like:L10C cable,after 'External Connector Info"
the 6 and 8 pin is short,
then we can know 6 is D+ and 8 pin is D-
but how to set the Low Level pin?
remove the vcc\gnd\d+\d-
you can set all pin is Low Level


After Do this
I can sure Your Mstar Mobile will 100% can Flash With IQ Doctor Box​