answer: MasterBox_V3.3.1.894 Test report
nony s311
cpu: mtk 6225
problem dead
action taken:
1.connect with masterTools
2.connect success
3.read info success
4.read firmware success
5.format failed
6.write new working flash file failed
7.write own readed backup firmware failed
..............Decided to work with hardware..............
8.resolder flash chip
9.some hit on cpu with glue
10.again connect with master tools success
11.now format success but phone not alive
12.write new working firmware
link is added
13.write flash success
14.phone now working alive
test report here
investigation from this case
.................................................
sometimes we found some set which is with common cpu.but we think it is may be not full supported.
actually we never try to understand and investigate the actual fault.
we are unwilling to do this kinds job.because it is a lengthy time hard work.
for that reason i posted this thread with a lot of info also with a sure example.hope next time take care ur work.
working file is only for my friend
http://www.4shared.com/rar/ET42oimW/...ested_by_G.htm
...........
MasterTools Team