josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
This is guide How to check cable problem by your self


Connecting with Bad cable.

cableCheck1.png


Open Pinout Settings. Use fake pinout in LOG Window then Set.

cableCheck2.png


Click on Voltage button. This will not show voltage at any pins.
Mean : Main cable or RED / BLACK wire are lose.

cableCheck3.png


Try to recheck with Internal battery. Show voltage in some pins
Mean : Main cable is OK. But RED / BLACK wire may be lose.

cableCheck4.png


If All is OK. Voltage must show when both Main cable and RED / BLACK wire are connected.

cableCheck5.png


And we can use to work.

cableCheck6.png



Finally. If method 1-5 are OK. Try to check phone hardware.



We Are Working Hard!!!



Best Regard
AvatorBox Team



 
Back
Top