digital_amit
Junior Member
- Joined
- Oct 31, 2011
- Posts
- 27
- Likes
- 0
Hello, New Cyclone Box Installer is READY.
What's new?
=====================
Installer v1.05
23.04.2010
=====================
- Added support for NEW Nokia BB5 FBUS CMT Loaders (flashing new phones E52 ST Chip, X3, X6, 5530, etc, etc), supported RAPU,RAPIDO,RAPv4 phones,etc. You can flash your phone using New Protocol, but also manage Reading/Writing Certificates,etc.
- Added support for BB5 FBUS New Protocol APE Loaders
- Added support for Unlock / Relock / Autolock DCT4 RSA Based phones (1661, 5030, 1202, and generally ALL ASIC 11 phones), without patch. Solution is standalone and to unlock one phone takes no longer than 2 seconds.
- Added CS Repair due to Bad Simlock in ASIC11 phones (no patch)
- Latest Nokia Loaders 2010 Introduced (including upgraded RAPv3 old prot algo 9.50)
- Added SD Repair, RPL Calc, etc for RAP3v2 phones (hash E9EFF4BFAA5393217CA6B17755FC3E14)
- Added SIMLOCK BACKUP for SL3 phones (can be restored even after fullerase)
- Added support for NCK Reading, SD Extracting, and more accurate Securtity Analysis for v30.xx phones (N96,5800,etc - so called by "mx" team "sl3" but in fact is simple sl2), previous versions gave msg about "Decryption fails"
- Added COM Emulator - now Cyclone Box can work as UNI BOX with UFS Pinout !
- Added one-click analyze / repair of Dynamic Camera Configuration (blank screen, "camera not ready",etc) based phones (DCT4plus, 5310, 7210, 5220, 6700, others) supported Camera Drivers:
GR0103D101260C206C02
GR0103D101260C213402
GR0103D10126095A1F05
GR0103D10126095A1F07
GR0103D10126095A1F87
GR0103D1012601022C00
GR0103D1012601022E05
GR09733814140C206C02
GR0973381414095A1F05
GR0973381414095A1F07
GR0973381414095A1F87
GR097338141401022C00
ISL2TI020000093E2F30
NI00IIIIRR030C20C607
NI00IIIIRR03095B1F00
NI00IIIIRR03095B1F01
NI00IIIIRR030102F200
NI00IIIIRR030102F201
NI00IIIIRR030102F202
NI00IIIIRR030102F203
NI00IIIIRR0301035420
NIMMIIIIRRFF0A021001
NIMMIIIIRRFF094B2F01
NIMMIIIIRRFF06150018
NIMMIIIIRRFF06150110
ST090404003C06150018
ST090404004C06150018
- Added TX2 warning when certificate is being not accepted (common problem while writing RPL)
- Updated Nokia USB Connectivity Drivers to 7.1.22.0
- Upon installation, StoredFiles permission is now set to full to avoid Permission problems (and software is still safe for trojans/etc)
- Folder "StoredFiles" is no longer marked to Delete upon Uninstallation to keep old backup files
- Rewritten BB5 RPL Backup routine, now Certificates are being backed-up first, so even if phone is DEAD, still certs will be backed-up
- Factory defaults after flash are now defaultly ticket (BB5,DCT4)
- Mode transition manager added in firmware v01.37
- Software accept Mode Transision to "Normal" when phone goes to "Power Off"
- Flash Variants are displayed now in descending order
- SL Array readen now upon RPL Backup is Keyb/FBUS Count masked
- Now, all 7 codes are being sent to phone (some phones don't accept +7 codes - tested on N71)
- Fixed NCK Calculation for some mobiles (Security Section Checksum Error)
- When software detects HWC/CCC/Variant certs mismatch, it tries to write local one from database
- Fixed smartcard not responding for reset in some configurations
- Fixed "Failed to Read SP Info" on older RAPv2 phones
- Path manager - bug "/" fixed
- Fixed problems with StoredFiles managing when software have no enough permissions (occurs on WinVista / Win7)
- SX4 Bypass is removed now (no need anymore)
- Improved sending CMT Secondary Loader
- Fixed TX2 test crash when phone is completly erased (TOC erased)
- Added automatic PM upload with field 1,309 after SX4 Authorization (one-click ST_SECURITY_FIX !), Supported 100+ BB5 phones in local database
- Improved Security Analysis, added HWC/CCC/Variant Certs Check
- Box Firmware : 01.0C, Access Violation Fixed
- Runtime Error when "Disable Skins" enabled fixed
- Taksbar problems fixed
- Fixed 1208 UEM Read/IMEI Rebuild
- N73 booting improved (when backing up crt, writing rpl incorrect loaders was assumed before)
- New Nokia Firmware introduced, improved stability a lot
- DCT4Plus relock fixed
- Mode transition improved
- BB5 USB Flashing fixed
- Factory Set problems fixed
- Fixed problems when dealing with RAP3v2 Phones
- Skin manager upgraded to v6.63
- HW Platform is now being readen upon Box Initialization
- Added support for CTF'2010 Platform
- Flashbus writing speed increased about 10%
- Flashbus FUR messages reading speed increased about 40%
- BB5 Booting procedure rewritten, now no problems in phones like 5800,N97,5200,etc..
- After flashing, added average writing speed display
- BootAgent removed, now Bootloader upgrade is managed by middle-loader
- Main Firmware rewritten from scratch, old bugs gone away.
- MPU Added
- Improved Oscillator startup time, box hangup fixed in some cases
- Realtime clock not used anymore, too much hardware problems when box not started
- Fixed booting dead BB5 mobiles
- If bb5 booting fails, SW displays possible reason reported by new firmware
- BB5 is being try to boot now without hardware VCC switch
- Added USB Dualport transactions (increases speed)
- Added old protocols support (tick "Use Old Protocols Loader")
- Upon finding CMT/APE loaders, it shows a find parameters (TX2 line, Requested Protocol Type, etc)
- BB5 flash_block_Data checksum fixed
- Additional flash chip information is now shown upon BB5 Alg Boot (VPP Info, Chip Size)
- Fixed boot when after activating DCT4 FTD phone comes to dead
- Fixed "Failed to decode MSID" when flashing some PPM DCT4 files
- UPP ID is now represented as hex upon Read Info
- Added detection whether Pri/Sec camera exists or is configurable
- Minor changes and bugfixes
- Black Skin introduced
- Fixed DCT4 Unlock not being executed after Flashing Procedure
- Versions snap
Installer v1.05
Main x86 Application v1.0.0.9392
x86 Memory Manager v4.92
Native USB Drivers v1.0.0.4
USB-COM Stack Drivers v1.0.0.0
Onboard Secure Bootloader v2.10
Onboard Main Nokia Application v01.37
Onboard COM Emulation Code v1.00
Onboard Security Card Revision v1.09
Nokia Connectivity Cable Drivers v7.1.22.0
BB5 USB/FPIF Single Line/FPIF DualLine v20100410
DCT4 FPIF Single Line/USB v20100410
DCT4 Unlock Patches DEPRECATED
Communication Stack SSLv3-keys-06092008
Skin Stack v6.63
Thanks to all contributors which supporting us! Thanks Moulnisky, ptt, Honey... Thanks arash & others...
Where to download?
DOWNLOAD LINK 1
DOWNLOAD LINK 2
!!CYCLONE - STOP ME IF YOU CAN!!
DIGITAL -AMIT
What's new?
=====================
Installer v1.05
23.04.2010
=====================
- Added support for NEW Nokia BB5 FBUS CMT Loaders (flashing new phones E52 ST Chip, X3, X6, 5530, etc, etc), supported RAPU,RAPIDO,RAPv4 phones,etc. You can flash your phone using New Protocol, but also manage Reading/Writing Certificates,etc.
- Added support for BB5 FBUS New Protocol APE Loaders
- Added support for Unlock / Relock / Autolock DCT4 RSA Based phones (1661, 5030, 1202, and generally ALL ASIC 11 phones), without patch. Solution is standalone and to unlock one phone takes no longer than 2 seconds.
- Added CS Repair due to Bad Simlock in ASIC11 phones (no patch)
- Latest Nokia Loaders 2010 Introduced (including upgraded RAPv3 old prot algo 9.50)
- Added SD Repair, RPL Calc, etc for RAP3v2 phones (hash E9EFF4BFAA5393217CA6B17755FC3E14)
- Added SIMLOCK BACKUP for SL3 phones (can be restored even after fullerase)
- Added support for NCK Reading, SD Extracting, and more accurate Securtity Analysis for v30.xx phones (N96,5800,etc - so called by "mx" team "sl3" but in fact is simple sl2), previous versions gave msg about "Decryption fails"
- Added COM Emulator - now Cyclone Box can work as UNI BOX with UFS Pinout !
- Added one-click analyze / repair of Dynamic Camera Configuration (blank screen, "camera not ready",etc) based phones (DCT4plus, 5310, 7210, 5220, 6700, others) supported Camera Drivers:
GR0103D101260C206C02
GR0103D101260C213402
GR0103D10126095A1F05
GR0103D10126095A1F07
GR0103D10126095A1F87
GR0103D1012601022C00
GR0103D1012601022E05
GR09733814140C206C02
GR0973381414095A1F05
GR0973381414095A1F07
GR0973381414095A1F87
GR097338141401022C00
ISL2TI020000093E2F30
NI00IIIIRR030C20C607
NI00IIIIRR03095B1F00
NI00IIIIRR03095B1F01
NI00IIIIRR030102F200
NI00IIIIRR030102F201
NI00IIIIRR030102F202
NI00IIIIRR030102F203
NI00IIIIRR0301035420
NIMMIIIIRRFF0A021001
NIMMIIIIRRFF094B2F01
NIMMIIIIRRFF06150018
NIMMIIIIRRFF06150110
ST090404003C06150018
ST090404004C06150018
- Added TX2 warning when certificate is being not accepted (common problem while writing RPL)
- Updated Nokia USB Connectivity Drivers to 7.1.22.0
- Upon installation, StoredFiles permission is now set to full to avoid Permission problems (and software is still safe for trojans/etc)
- Folder "StoredFiles" is no longer marked to Delete upon Uninstallation to keep old backup files
- Rewritten BB5 RPL Backup routine, now Certificates are being backed-up first, so even if phone is DEAD, still certs will be backed-up
- Factory defaults after flash are now defaultly ticket (BB5,DCT4)
- Mode transition manager added in firmware v01.37
- Software accept Mode Transision to "Normal" when phone goes to "Power Off"
- Flash Variants are displayed now in descending order
- SL Array readen now upon RPL Backup is Keyb/FBUS Count masked
- Now, all 7 codes are being sent to phone (some phones don't accept +7 codes - tested on N71)
- Fixed NCK Calculation for some mobiles (Security Section Checksum Error)
- When software detects HWC/CCC/Variant certs mismatch, it tries to write local one from database
- Fixed smartcard not responding for reset in some configurations
- Fixed "Failed to Read SP Info" on older RAPv2 phones
- Path manager - bug "/" fixed
- Fixed problems with StoredFiles managing when software have no enough permissions (occurs on WinVista / Win7)
- SX4 Bypass is removed now (no need anymore)
- Improved sending CMT Secondary Loader
- Fixed TX2 test crash when phone is completly erased (TOC erased)
- Added automatic PM upload with field 1,309 after SX4 Authorization (one-click ST_SECURITY_FIX !), Supported 100+ BB5 phones in local database
- Improved Security Analysis, added HWC/CCC/Variant Certs Check
- Box Firmware : 01.0C, Access Violation Fixed
- Runtime Error when "Disable Skins" enabled fixed
- Taksbar problems fixed
- Fixed 1208 UEM Read/IMEI Rebuild
- N73 booting improved (when backing up crt, writing rpl incorrect loaders was assumed before)
- New Nokia Firmware introduced, improved stability a lot
- DCT4Plus relock fixed
- Mode transition improved
- BB5 USB Flashing fixed
- Factory Set problems fixed
- Fixed problems when dealing with RAP3v2 Phones
- Skin manager upgraded to v6.63
- HW Platform is now being readen upon Box Initialization
- Added support for CTF'2010 Platform
- Flashbus writing speed increased about 10%
- Flashbus FUR messages reading speed increased about 40%
- BB5 Booting procedure rewritten, now no problems in phones like 5800,N97,5200,etc..
- After flashing, added average writing speed display
- BootAgent removed, now Bootloader upgrade is managed by middle-loader
- Main Firmware rewritten from scratch, old bugs gone away.
- MPU Added
- Improved Oscillator startup time, box hangup fixed in some cases
- Realtime clock not used anymore, too much hardware problems when box not started
- Fixed booting dead BB5 mobiles
- If bb5 booting fails, SW displays possible reason reported by new firmware
- BB5 is being try to boot now without hardware VCC switch
- Added USB Dualport transactions (increases speed)
- Added old protocols support (tick "Use Old Protocols Loader")
- Upon finding CMT/APE loaders, it shows a find parameters (TX2 line, Requested Protocol Type, etc)
- BB5 flash_block_Data checksum fixed
- Additional flash chip information is now shown upon BB5 Alg Boot (VPP Info, Chip Size)
- Fixed boot when after activating DCT4 FTD phone comes to dead
- Fixed "Failed to decode MSID" when flashing some PPM DCT4 files
- UPP ID is now represented as hex upon Read Info
- Added detection whether Pri/Sec camera exists or is configurable
- Minor changes and bugfixes
- Black Skin introduced
- Fixed DCT4 Unlock not being executed after Flashing Procedure
- Versions snap
Installer v1.05
Main x86 Application v1.0.0.9392
x86 Memory Manager v4.92
Native USB Drivers v1.0.0.4
USB-COM Stack Drivers v1.0.0.0
Onboard Secure Bootloader v2.10
Onboard Main Nokia Application v01.37
Onboard COM Emulation Code v1.00
Onboard Security Card Revision v1.09
Nokia Connectivity Cable Drivers v7.1.22.0
BB5 USB/FPIF Single Line/FPIF DualLine v20100410
DCT4 FPIF Single Line/USB v20100410
DCT4 Unlock Patches DEPRECATED
Communication Stack SSLv3-keys-06092008
Skin Stack v6.63
Thanks to all contributors which supporting us! Thanks Moulnisky, ptt, Honey... Thanks arash & others...
Where to download?
DOWNLOAD LINK 1
DOWNLOAD LINK 2
!!CYCLONE - STOP ME IF YOU CAN!!
DIGITAL -AMIT