c6-00 only vibrate

[topdinosaurs]

flashed with latest version but same prob (only vibrate when power on)
any idea ?
thnks in advance

 

[Shikderg]

answer: c6-00 only vibrate

flash with same product code firmware and post her self test log

 

[simediavel]

answer: c6-00 only vibrate

flashed with latest version but same prob (only vibrate when power on)
any idea ?
thnks in advance

flash with latest ver 42.0.4

 

[topdinosaurs]

answer: c6-00 only vibrate

this is the log of flashing operation with same flash product code
----------------------------------------
Switched to USB BUS
BB5 PM back Phone is in: Phone is not responding!
Processing File: RM-612_42.0.004_prd.core.C00
Boot...
CONNECT PHONE to USB and Power ON phone!
Pooling for phone...
\\?\nmwcd#vid_0421&pid_0106&if_oth#6&2bb7c3a&5&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Sending ULO code
Isa UPDAPP
RAP3NAND
PASUBTOC
UPDAPP
Pooling for device removal...
Device removed
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&16458007&4&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
CMT Certificates
NOT SUPPORTED
Erase[558.12 MB]...
erasing APE [00040000 to 00082FFF]
erasing APE [00083400 to 003FFFFF]
erasing APE [00800000 to 00D5FFFF]
erasing APE [00D60000 to 0D39FFFF]
erasing APE [0D3C0000 to 1EF7FFFF]
erasing APE [094A0000 to 0C49FFFF]
erasing APE [0C4A0000 to 0D39FFFF]
erasing APE [00400000 to 007FFFFF]
in 14.17s
Flash[111.93 MB]...in 39.36s
* * Processed file in 74.06 seconds
Processing File: RM-612_42.0.004_uda_2_001.uda.fpsx
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&16458007&4&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 2.80s
Flash[56.79 MB]...in 28.02s
* * Processed file in 30.94 seconds
Processing File: RM-612_42.0.004_prd.rofs2.V25
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&16458007&4&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.02s
Flash[26.22 MB]...in 8.97s
* * Processed file in 9.09 seconds
Processing File: RM-612_42.0.004_C01_prd.rofs3.fpsx
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&16458007&4&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.00s
Flash[0.01 MB]...in 0.03s
* * Processed file in 0.17 seconds
Processing File: RM612_APE_ONLY_ENO_11w42_v0.020.fpsx
Boot...
Pooling for ADL device...
\\?\nmwcd#vid_0421&pid_0105&if_oth#6&16458007&4&00#{4f919102-4adf-11d5-882d-00b0d02fe381}
Erase[0.00 MB]...
in 0.00s
Flash[2.68 MB]...in 0.91s
* * Processed file in 1.05 seconds
Restarting device...
Pooling for device removal...
Device disconnected.
* * * Phone flashing done in 1:59 minutes
Post Flash serial tunning of phone....
Pooling mode for full factory set...
V ICPR72_11w16.3/05-12-11/RM-612 (c) Nokia
IMEI: 356994046251165
Factory Default Settings...OK
Reset user code...Failed to reset user code
Phone is in: Local mode
Full Factory Set...OK
Phone is in: Local mode
User Data...OK
Phone is in: Local mode
Leave Factory...OK
Phone is in: Local mode
Service Center...OK
Phone is in: Local mode
Software Upgrade...OK
Phone is in: Local mode
Production Tune...OK
---------------------------------------------------

after flashing only vibrate

 

[Shikderg]

answer: c6-00 only vibrate

reflash phone with last version 111.3
if not solve then check with hardware