Before Open a Thread Search Here Hardware Solutions!

[josher]

iPhone 4 ESD components that make problems!

If phone is water damaged this components can make problems it is safe to remove them.
Use soldering iron (Recommended) to take them off from board.
If you use tweezers they could remove with solder pad (not recommended).

 

[josher]

iPhone 4 Both Camera's Solution!

This is hardware solution make only if you try other camera and restore phone.

 

[josher]

iPhone 4 Ambient Light and Proxy Sensors Solution.

Try this hardware solution only if with other lcd assembly or after restore same not work.

 

[josher]

iPhone 4 and iPod Touch 4 have same PMIC!

I tested and it work same only different numbers have.

 

[josher]

iPhone 4 Touch Fault After Emi Shield Removed By Someone!

Some nub removed metallic frame and have touch this capacitor that is connected to touch ic internal supply line and touch had no reaction,check careful it can be even other capacitor around!

 

[josher]

iPod touch 2g Power key track.

 

[josher]

iPhone 4S Corroded components solution!

I used organic flux for this work is very useful.

 

[josher]

iPad 2 No Backlight Repair Lcd,Guide With Photos!

Ok here is entire guide to repair LCD Light flex that got crack,i have check it is located near sim connector.

 

[josher]

iPod Touch 4G PMIC Pinout.

Check this it is almost same circuit like in iPhone 4 you can guide in repair it by looking in iPhone 4 schematic.

 

[josher]

iPhone 4S Fake Charging After Water Damage!

Try like this or replace coil take from iPhone 4g L7_PMU is same only there is used for lcd voltage!

 

[josher]

iPhone 4 Find Short Solution!

This marked components are most that cause short after water damage and not only.

 

[josher]

iPhone 3G Power Button Full Solution!

Try this hardware solution if other power flex not solve.

Also if you have auto power on replace U18_AP.
Under solution appreciate this useful post.

 

[josher]

iPod Touch 4G Home Button Solution!

 

[josher]

iPod Touch 2g No Charging,No Detect at PC Solution!

In third step i explain how to unsolder glass ic without heat,this to prevent overheat of other ic around,most technicians know about this method we used in old Nokia phones to unsolder them.
Check this picture i draw here how are connected charging ways,i not know if in this ipod is some charging coil need more investigation.

 

[josher]

Reball of Big IC Without Stencil.

It was easy to reball this ic only needed more solder wire to be used,even can reball xbox cpu in this way or other ic.
Canon DC20 CCM-Micom Reball Without Stencil. - YouTube