josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
Please Post Here your Successfully Repaired Phone with Medusa Box.
Thank You.
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
Selected device model: Huawei U1000s
Connecting. Please wait...
MI: Speed set to 1000 KHz.
MI: Medusa JTAG Interface version 1.6
MI: Detected Core ID:100D40E1.
MI: Target CPU Qualcomm MSM6245 (ID:100D40E1, Core:ARM926EJ-S), ST:1.
VREF level : 2.61 V
CPU : Qualcomm MSM6245
Core ID : 100D40E1
MI: RTCK reaction time 126 ns.
MI: Speed set to Adaptive (RTCK).
MI: CP15:0:0 = 41069263
MI: Loading server.
MI: Starting server.
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000065.
MI: Detailed server caps: FLASH, ECC, DWP, SAFEW
MI: Received flash ID 0x0000EC36.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000065
Flash device: Samsung K9F1208
Flash ID : 0000EC36
Page size : 512 bytes
Block size : 32 pages (16 Kb)
Block count: 4096
Flash size : 64 Mb
Write protection disabled.
Opening "C:\Program Files\GsmServer\Medusa\Firmware\HUAWEI_U1000S_Repa ir.mf" file...
Writting BOOT section. Please wait... Done
Writting FIRMWARE section. Please wait... Done
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
Repair Boot SAMSUNG U700
-----
Welcome to Medusa Box Software version 1.0.3
Selected device model: Samsung U700
Connecting. Please wait...
Detected Core ID: 100D00E1
CPU : Qualcomm MSM6260
Core ID : 100D00E1
Flash device: Toshiba TY9000AC10AOBG
Page size : 512 bytes
Block size : 32 pages (16 Kb)
Block count: 8192
Flash size : 128 Mb
Opening "C:\BLFiles\medusa\SAMSUNG_U700_Repair.mf" file...
Writting BOOT section. Please wait... Done
Disconnected
Repair done.

Repair Boot Samsung U700 EasyRepair Mode with MedusaBox by S@lwos - YouTube
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
su960:


Selected device model: LG SU960
Connecting. Please wait...
Detected Core ID: 301C00E1
VREF level : 2.60 V
CPU : Qualcomm MSM6290
Core ID : 301C00E1
Flash device: Hynix H8BES0UQ0MCR
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
Write protection disabled.
Connect succesfull.
Opening "C:\Documents and Settings\ariel\Desktop\Octopus\lg su960 fullflash ecc\LG SU960 FullFlash ECC 13-04-2011 14_15_07.bin" file...
Writting BOOT section. Please wait...
Canceled...
ECC Mode enabled.
Disconnected
ECC Mode enabled.
Selected device model: LG SU960
Connecting. Please wait...
Detected Core ID: 301C00E1
VREF level : 2.60 V
CPU : Qualcomm MSM6290
Core ID : 301C00E1
Flash device: Hynix H8BES0UQ0MCR
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 4096
Flash size : 512 Mb
Write protection disabled.
Connect succesfull.
ECC Mode enabled.
Opening "C:\Documents and Settings\ariel\Desktop\Octopus\lg su960 fullflash ecc\LG SU960 FullFlash ECC 13-04-2011 14_15_07.bin" file...
Writting BOOT section. Please wait... Done
Writting FIRMWARE section. Please wait... Done
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
Successfully revived sh110 Dead boot....

2-1.jpg
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
LG KU9500 repair boot done !

Welcome to Medusa Box Software version 1.0.9
Selected device model: LG KU9500
Connecting. Please wait...
MI: Speed set to 1000 KHz.
MI: Medusa JTAG Interface version 1.7
Detected Core ID: 1BA000E1
Detected Core ID: 202800E1
MI: Target CPU Qualcomm QSD8650 (ID:202800E1, Core:ARM926EJ-S), ST:5.
VREF level : 2.66 V
CPU : Qualcomm QSD8650
Core ID : 202800E1
MI: RTCK reaction time 126 ns.
MI: Speed set to Adaptive (RTCK).
MI: P15,C0,C0: 0x41069265
MI: Loading server.
MI: Starting server.
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x0000007F.
MI: Detailed server caps: FLASH, CFG, ECC, BASE, WDOG, DWP, SAFEW
MI: Watchdog configuration: 0xB800010C, 0x00000001... ok
MI: Received configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Server init.
MI: Received flash ID 0x0055ADB3.
MI: Flash geometry set.
MI: Recheking settings... ok
MI: Setting configuration: 0xAAD400DA, 0x0044747E, 0x0000000D
MI: Configuration done.
Server caps : 0000007F
Flash device: Hynix H8BES0WU0MCR
Flash ID : 0000ADB3
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 8192
Flash size : 1024 Mb
Connect succesfull.
Opening "F:\MEDUSA\LG\KU9500\LG_KU9500_Repair.mf" file...
Writting BOOT section. Please wait... Done

 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
-LG KH6400 repair boot done
Log started at 7/12/2011 9:46:55 AM ...
Welcome to Medusa Box Software version 1.1.2
Selected device model: LG KH6400
Connecting. Please wait...
Detected Core ID: 200C00E1
VREF level : 2.61 V
CPU : Qualcomm MSM6280
Core ID : 200C00E1
MI: RTCK reaction time 126 ns.
MI: Loading server.
MI: Starting server.
MI: Received status 0x0000F00F, cycle 0.
MI: Received server capabilities 0x00000035.
MI: Detailed server caps: FLASH, ECC, WDOG, DWP
MI: Watchdog are preconfigured.
MI: Server init.
MI: Received flash ID 0x000098CA.
MI: Flash geometry set.
MI: Recheking settings... ok
Server caps : 00000035
Flash device: Toshiba TYA000BC00DOGG
Flash ID : 000098CA
Page size : 2048 bytes
Block size : 64 pages (128 Kb)
Block count: 2048
Flash size : 256 Mb
Write protection disabled.
Opening "D:\LG_KH6400_Repair.mf" file...
Writting BOOT section. Please wait... Done
Disconnected

Flash and unlock by octopus done

Log file "C:\Program Files\GsmServer\Octopus_LG\LOG\12-07-2011_10-00-25.log" created.
7/12/2011 10:00:34 AM > Welcome to Octopus Box LG Software version 1.8.7
7/12/2011 10:02:00 AM > --------------------------------------------------------------------------------
7/12/2011 10:02:00 AM > Platform: LG Qualcomm
7/12/2011 10:02:00 AM > Selected port: COM3
7/12/2011 10:02:00 AM > Selected model: KH6400
7/12/2011 10:02:03 AM > Phone not detected. Please try again.
7/12/2011 10:02:48 AM > --------------------------------------------------------------------------------
7/12/2011 10:02:48 AM > Platform: LG Qualcomm
7/12/2011 10:02:49 AM > Selected port: COM3
7/12/2011 10:02:49 AM > Selected model: KH6400
7/12/2011 10:02:51 AM > Phone not detected. Please try again.
7/12/2011 10:06:21 AM > --------------------------------------------------------------------------------
7/12/2011 10:06:21 AM > Platform: LG Qualcomm
7/12/2011 10:06:21 AM > Selected port: COM19
7/12/2011 10:06:21 AM > Selected model: KH6400
7/12/2011 10:06:21 AM > Mode: Emergency
7/12/2011 10:06:21 AM > --------------------------------------------------------------------------------
7/12/2011 10:06:21 AM > Please, make sure the phone's battery is fully charged.
Disconnect all other devices from the computer (including phones, modems, etc.) and close all other running programs. To avoid errors in the flashing process, use a clean PC (without any installed drivers for other Qualcomm-based devices). You should not run any other programs or attach new devices to your computer during the flashing!

Please, follow these simple precautions to avoid damaging your phone.
7/12/2011 10:06:21 AM > --------------------------------------------------------------------------------
7/12/2011 10:06:26 AM > Opening "KW640806_02.oct"...7/12/2011 10:06:26 AM > OK
7/12/2011 10:06:26 AM > Writing Firmware...
7/12/2011 10:06:30 AM > Writing MIBIB...7/12/2011 10:06:34 AM > OK
7/12/2011 10:06:34 AM > Writing QCSBL...7/12/2011 10:06:34 AM > OK
7/12/2011 10:06:34 AM > Writing OEMSBL1...7/12/2011 10:06:38 AM > OK
7/12/2011 10:06:38 AM > Writing OEMSBL2...7/12/2011 10:06:42 AM > OK
7/12/2011 10:06:42 AM > Writing AMSS...7/12/2011 10:08:33 AM > OK
7/12/2011 10:08:33 AM > Writing FAT...7/12/2011 10:09:33 AM > OK
7/12/2011 10:09:33 AM > Writing EFS2...7/12/2011 10:16:51 AM > OK
7/12/2011 10:16:52 AM > Phone startup...7/12/2011 10:17:24 AM > OK
7/12/2011 10:17:24 AM > Repairing NVM...
7/12/2011 10:17:31 AM > Repairing NVM complete.
7/12/2011 10:17:32 AM > Writing Firmware done!
7/12/2011 10:17:32 AM > Rebooting phone...
7/12/2011 10:17:56 AM > --------------------------------------------------------------------------------
7/12/2011 10:17:57 AM > Platform: LG Qualcomm
7/12/2011 10:17:57 AM > Selected port: COM19
7/12/2011 10:17:57 AM > Selected model: KH6400
7/12/2011 10:17:57 AM > Mode: Normal
7/12/2011 10:17:57 AM > Phone model: KW640806
7/12/2011 10:17:57 AM > SW Version: M6281A-KLRZ-4.0.9530T
7/12/2011 10:17:57 AM > IMEI: 353067-02-110716-6
7/12/2011 10:17:57 AM > Bluetooth address: 00:21:FB:0C:8E:49
7/12/2011 10:17:57 AM > Firmware compiled date: Jan 07 2008
7/12/2011 10:17:57 AM > Firmware compiled time: 19:00:00
7/12/2011 10:17:57 AM > Firmware released date: Apr 23 2008
7/12/2011 10:17:57 AM > Firmware released time: 13:00:00
7/12/2011 10:17:59 AM > --------------------------------------------------------------------------------
7/12/2011 10:17:59 AM > Platform: LG Qualcomm
7/12/2011 10:17:59 AM > Selected port: COM19
7/12/2011 10:17:59 AM > Selected model: KH6400
7/12/2011 10:17:59 AM > Mode: Normal
7/12/2011 10:17:59 AM > Phone model: KW640806
7/12/2011 10:17:59 AM > SW Version: M6281A-KLRZ-4.0.9530T
7/12/2011 10:17:59 AM > IMEI: 353067-02-110716-6
7/12/2011 10:17:59 AM > Bluetooth address: 00:21:FB:0C:8E:49
7/12/2011 10:17:59 AM > Checking security...
7/12/2011 10:18:01 AM > Prepairing loader...7/12/2011 10:18:04 AM > OK
7/12/2011 10:18:04 AM > Sending loader...7/12/2011 10:18:04 AM > OK
7/12/2011 10:18:04 AM > Searching signatures...
7/12/2011 10:18:04 AM > Signature #1...
7/12/2011 10:18:05 AM > Searching signatures...
7/12/2011 10:18:05 AM > Signature #1...7/12/2011 10:18:05 AM > OK, not patched
7/12/2011 10:18:05 AM > Patching...
7/12/2011 10:18:05 AM > Signature #1...7/12/2011 10:18:07 AM > OK
7/12/2011 10:18:07 AM > Phone successfully unlocked!
7/12/2011 10:18:07 AM > Rebooting phone...
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
Samsung Anycall SPH-W9500 Dead Boot (Solve)

Image;
Pinout
5983859799_4ca0ebdb24_b.jpg


Connect;
5984419580_c52a81f68f_b.jpg


Repair FIle;
5983858927_0d9e445623_b.jpg


5983859169_216c7f06f2_b.jpg


5984420308_a5426bbe9a_b.jpg


Ready to Flash;
5984420972_25002c5082_b.jpg




Solve;
5984421230_6ef7b5a024_z.jpg
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
Samsung Anycall SPH-W7700 DeadBoot Problem Solve!





Image;
Pinout
5983352225_ec051e1134_b.jpg


Connect;
5983912978_cdb40b47fe_b.jpg




Write Dump File;
5983920690_514d23f4f9_b.jpg


Ops! Error dont worry the phone is power on. ready to download mode and Flash;

Finesh and Ready;
Iwas Abuno na si TEch
biggrin.gif


5983913544_4e43746663_z.jpg
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
LATEST ONE MY P509 DEAD , ALIVE BACK

P509rep.jpg


AFTER REPAIR BOOT FLASH IT

p509fls.jpg
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
Samsung Anycall SPH-W5500 Dead Boot

Tool's;
-Meduza Box
-Pinout Rj45

Procedure;

- At the Software

Image;

6088747628_47f6b3620e_b.jpg


6088747980_a4ef606820_b.jpg


6088203223_2fe3ca0698_b.jpg


Wella;
6088748604_ae6dd884e2_b.jpg
 

josher

Well-known Member
Joined
Sep 5, 2010
Posts
6,745
Likes
176
HTC HD7 succesfully unlocked via reading code!

Welcome to Medusa Box Software version 1.1.8
Selected device model: HTC HD7 (PD29110)
Connecting. Please wait...
Detected Core ID: 202400E1
VREF level : 2.60 V
CPU : Qualcomm QSD8250
Core ID : 202400E1
Flash device: Samsung 512Mb
Flash ID : 0066ECBC
Page size : 4096 bytes
Block size : 64 pages (256 Kb)
Block count: 2048
Flash size : 512 Mb
HTC CID : T-MOB010
IMEI : 354004-04-******
Connect successful.
Rading codes. Please wait...
NCK Code : 05085742
Done
 
Top