Post here all successfuly flashed, unlocked and repaired phones with infinity best.

[huttnn]

nokia xl rm1030 done
registered to: skyulock

Connect phone on selected interface...

Core : v1.98 , NXP FlashEngine : v3.7

Flash Mode : Full Update (System, User, Boot)
Check and select files according selected FlashMode

Ok, Set : RM1030_V2_1.2.3.21_059W289_PWBASSY_RM-1030_LIGHT_SWAP_ENGINE_GLOBAL_V2_variant.img
Ok, Set : RM1030_V2_1.2.3.21_boot.img
Ok, Set : RM1030_V2_1.2.3.21_cache.img
Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboot.mbn
Ok, Set : RM1030_V2_1.2.3.21_emmc_appsboothd.mbn
Ok, Set : RM1030_V2_1.2.3.21_fat.bin
Ok, Set : RM1030_V2_1.2.3.21_oemsbl.mbn
Ok, Set : RM1030_V2_1.2.3.21_oemsblhd.mbn
Ok, Set : RM1030_V2_1.2.3.21_persist.img
Ok, Set : RM1030_V2_1.2.3.21_preload.img
Ok, Set : RM1030_V2_1.2.3.21_qcsbl.mbn
Ok, Set : RM1030_V2_1.2.3.21_qcsblhd_cfgdata.mbn
Ok, Set : RM1030_V2_1.2.3.21_recovery.img
Ok, Set : RM1030_V2_1.2.3.21_system.img
Ok, Set : RM1030_V2_1.2.3.21_udisk.bin
Ok, Set : RM1030_V2_1.2.3.21_userdata.img

File HW revision is : HW Revision V2
HW Revision V2 files flashing accepted by user

Dead Mode is Selected
Waiting for USB device...
1. Phone should be Off!
2. Press and hold 'Volume Down' and 'Power' buttons
3. When feel short vibra - release 'Power' button, but keep hold 'Volume Down' button
4. Insert USB cable and hold button, until phone will be detected
Or
1. Phone should be Off!
2. Press and hold 'Volume Down' button
3. Insert USB cable and hold button, until phone will be detected


Connect Ok

Get Phone Initial Info
Product : MSM7627A
Version : 0.5
Serial : skyulock

Processing : RM1030_V2_1.2.3.21_qcsblhd_cfgdata.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_V2_1.2.3.21_qcsbl.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_V2_1.2.3.21_oemsblhd.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_V2_1.2.3.21_oemsbl.mbn
Init Ok, send data ...
Data sent, start flashing
[Info] : INFOhasHead == true!
Region Flash Done
Processing : RM1030_V2_1.2.3.21_emmc_appsboothd.mbn
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_V2_1.2.3.21_emmc_appsboot.mbn
Init Ok, send data ...
Data sent, start flashing
[Info] : INFOhasHead == true!
Region Flash Done
Processing : RM1030_V2_1.2.3.21_boot.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_V2_1.2.3.21_recovery.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_V2_1.2.3.21_persist.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_V2_1.2.3.21_fat.bin
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_V2_1.2.3.21_system.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_V2_1.2.3.21_cache.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_V2_1.2.3.21_userdata.img
Erase Partition : USERDATA
Partition Erase Done
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_V2_1.2.3.21_udisk.bin
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_V2_1.2.3.21_preload.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Processing : RM1030_V2_1.2.3.21_059W289_PWBASSY_RM-1030_LIGHT_SWAP_ENGINE_GLOBAL_V2_variant.img
Init Ok, send data ...
Data sent, start flashing
Region Flash Done
Rebooting phone now

Flashing done!
Total flash time : 00:05:50
Reboot phone Ok

Connect phone on selected interface...

 

[SWAPAN_MISHRA]

Nokia Asha-500 (RM-934) Blinking Problem Solve By BEST

Nokia Asha-500 (RM-934) Blinking Problem Solve By BEST

​