GPGDragon Success Format SPD shared in here!!!

N

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
Why GPGDragon agin post the beta software?
it same like the Old gpgdragon 2.11 the beta?
no full support SPD 6610 Flash?
no,this is will be 99% Support SPD 6610/20 CPU Flash!!!

so what we can test?
the answer is SPD Format
in gpgdragon office,we are idea is 95% SPD can format (after format 100% can working)


but gpgdragon team we are limited,we already test all SPD mobile in my hard,they format founction is very beautiful!!!

what this post mean?
it mean after gpgdragon Ver 2.12;your Repair SPD Cpu Mobile will be like MTK;just Format then take money!!! without finding flash file!!!

anyone you can shared your success format log/mobile name in here!
thank you a lot
 
N

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: GPGDragon Success Format SPD shared in here!!!

SPD 6610/20 fully support now in 2.12

see test report here

6620spd.png



Code: 
 Initializing...
 DA_LIB_VER_4.0.3.2
 It is sensing the pinout fast...
 RXD=18  TXD=17
 Connecting...
 Connected...sending boot...
 FDL test...OK
 ArmBootMode: 6610000000E26A00_00
 Wait for init Commzero Security Engine...
 Done.
 Loading bootloader...
 Done.
 Changing baudrate...
 Set baudrate to 115200 is ok
 Reading phone HW info...
 Read info is done.
 [B][COLOR=#00FF00]CPU: SC6610/20      Flash: SF_GD25Q32[/COLOR][/B]
 setting the Flash Parameters...
 Settings have been completed!
 setting the Serial Flash Parameters...
 Settings have been completed!
 Unlocking all blocks before program/erase...
 Unlock Done.
 Programming...
 Compare Image: Enable
 All Done.
 
N

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: GPGDragon Success Format SPD shared in here!!!

SPD 6610/20 fully support now in 2.12

see test report here

6620spd.png



Code: 
 Initializing...
 DA_LIB_VER_4.0.3.2
 It is sensing the pinout fast...
 RXD=18  TXD=17
 Connecting...
 Connected...sending boot...
 FDL test...OK
 ArmBootMode: 6610000000E26A00_00
 Wait for init Commzero Security Engine...
 Done.
 Loading bootloader...
 Done.
 Changing baudrate...
 Set baudrate to 115200 is ok
 Reading phone HW info...
 Read info is done.
 [B][COLOR=#00FF00]CPU: SC6610/20      Flash: SF_GD25Q32[/COLOR][/B]
 setting the Flash Parameters...
 Settings have been completed!
 setting the Serial Flash Parameters...
 Settings have been completed!
 Unlocking all blocks before program/erase...
 Unlock Done.
 Programming...
 Compare Image: Enable
 All Done...
 
N

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: GPGDragon Success Format SPD shared in here!!!

For Example

bassoon f20 menu problem successfully format

Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM8
Connected...sending boot...
FDL test...OK
ArmBootMode: 66100000000C5A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_FM25Q32
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x003D8000, Size=0x00028000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.


original post by sankhla871
 
N

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: GPGDragon Success Format SPD shared in here!!!

Again SPD 6600L Success Format by gpgdragon 2.12


Initializing...
DA_LIB_VER_3.9.0.0
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM8
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700100005A00_01
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6600L2 Flash: NOR_M36C0W6050T0
setting the Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x007A0000, Size=0x00050000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.

original post by akhtar.abbas
 
N

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: GPGDragon Success Format SPD shared in here!!!

bassoon f20 menu problem successfully format
Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM8
Connected...sending boot...
FDL test...OK
ArmBootMode: 66100000000C5A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_FM25Q32
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x003D8000, Size=0x00028000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
thx gpg team
 
N

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: GPGDragon Success Format SPD shared in here!!!

bassoon f20 menu problem successfully format Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM8
Connected...sending boot...
FDL test...OK
ArmBootMode: 66100000000C5A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_FM25Q32
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x003D8000, Size=0x00028000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
thx gpg team
 
N

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: GPGDragon Success Format SPD shared in here!!!

bassoon f20 menu problem successfully format Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM8
Connected...sending boot...
FDL test...OK
ArmBootMode: 66100000000C5A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_FM25Q32
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x003D8000, Size=0x00028000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
thx gpg team
biggrin.gif
 
N

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: GPGDragon Success Format SPD shared in here!!!

BASSOON F20 DEAD SET FORMATTING...............

Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Spd USB-to-Serial=COM26
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000485A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_FM25Q32
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x003D8000, Size=0x00028000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
N

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: GPGDragon Success Format SPD shared in here!!!

samsung c5212 cpu Sc6610/20 format done...

Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM477
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000305A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_GD25Q32
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x003B0000, Size=0x00050000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
N

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: GPGDragon Success Format SPD shared in here!!!

FIRST DEAD RECOVERED



THEN MENU PROBLEM SOLVED BY FORMAT

LOG

Chip=SpreadTrum
Action=Format
FlashType=NOR
boot=6600L/WT6226-USB
Expert Mode=Disable
Range[start]=0x0
Range[size]=0x0
Interface=COM
FlashFile=
Comport=COM13
Baudrate=921600

CPU_Type=SC6610/20
CPU_ID=66100000
NOR_ID=00C8004000160000
NOR_Size=4MB
NOR_Name=SF_GD25Q32
NOR_DieCnt=1
NAND_ID=
NAND_Size=
NAND_Name=

Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast...
D-=2 D+=3
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM29
Connected...sending boot...
FDL test...OK
ArmBootMode: 66100000000A5A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_GD25Q32
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x003D8000, Size=0x00028000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
N

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: GPGDragon Success Format SPD shared in here!!!

Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast...
RXD=18 TXD=16
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6600700900026A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 460800 is ok
Reading phone HW info...
Manufacturer: ST & NUMONYX, Device: Unknow
CPU: SC6600L7 Flash: NOR_UNKNOWN
Connect and search Security Code...
PhoneLock: 56789
PhoneLock: 1111
PhoneLock: 1000
Theft proof: 099167
Theft proof: 099168
Theft proof: 099169
Theft proof: 099166
Theft proof: 099137
Theft proof: 099138
Privacy protect: 0
PhoneLock: 00123456
Privacy protect: 123450
Theft proof: 019278
PhoneLock: 12345
PhoneLock: 01927
Done.
 
N

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: GPGDragon Success Format SPD shared in here!!!

Gright 1130 format Done

Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast...
D-=8 D+=6
Searching commport...please wait...
Connecting...
Spd USB-to-Serial=COM5
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000A85A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 921600 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_MX25U3235E
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading FileSystem info...
FileSystem Version: 0A
Start=0x003D8000, Size=0x00028000
Unlocking all blocks before program/erase...
Unlock Done.
Auto formatting...
Done.
 
N

NANAIU

Well-known Member
Joined
Oct 15, 2010
Posts
2,734
Likes
63
Location
BD
answer: GPGDragon Success Format SPD shared in here!!!

SAMSUNG C5212 SC6610/20 FORMAT DONE.....

Initializing...
DA_LIB_VER_4.0.3.2
It is sensing the pinout fast...
RXD=4 TXD=3
Connecting...
Connected...sending boot...
FDL test...OK
ArmBootMode: 6610000000106A00_00
Wait for init Commzero Security Engine...
Done.
Loading bootloader...
Done.
Changing baudrate...
Set baudrate to 115200 is ok
Reading phone HW info...
Read info is done.
CPU: SC6610/20 Flash: SF_GD25Q32
setting the Flash Parameters...
Settings have been completed!
setting the Serial Flash Parameters...
Settings have been completed!
Reading FileSystem info...
File System Ver: 0A
IMEI 1=353066040128609
IMEI 2=910575601400468
------Auto Format Address-------
Start=0x003B0000
Size =0x00050000
Read FS info...done
 
You must log in or register to reply here.
Prev Thread | Next Thread
Top