Some Tips, Tricks, Guides, Solutions, Troubleshoot for UCT Box Software

[New Vision]

answer: Some Tips, Tricks, Guides, Solutions, Troubleshoot for UCT Box Software

Problem Description:
How to solve the error: ERROR: MTK_DA_GET_FAT_INFO_NOT_FOUND


Reason:
UCT Software is not able to read the FAT information from the MTK handset, this is because of un-compatible flash chip or boot type.


Solution:
Try to select Boot "Ver. 3.952" from the options, if even this not works, then try other options one-by-one.

 

[New Vision]

answer: Some Tips, Tricks, Guides, Solutions, Troubleshoot for UCT Box Software

Problem Description:
Error: RXD<>MaxBuffSize, Please close all other program or change baudrate and try again.


Reason:
Software not able to buffer the data


Solution:
Select baud 921600 and try again

 

[New Vision]

answer: Some Tips, Tricks, Guides, Solutions, Troubleshoot for UCT Box Software

Problem Description:
Changing baudrate...
Failed to set baudrate...


Reason:
Usually driver problem. Communication between phone and pc is poor.


Solution:
1. Try with option "6600L-USB" or "6600L-COM" and try again.
2. Try to un-install spreadtrum drivers and install again.
3. Try with smaller baudrate.
4. Try with any other computer. Should work
5. if still not solve and handset is dead, can be 99% hardware problem.

 

[New Vision]

answer: Some Tips, Tricks, Guides, Solutions, Troubleshoot for UCT Box Software

Problem Description:
Changing baudrate...
Failed to set baudrate...


Reason:
Usually driver problem. Communication between phone and pc is poor.


Solution:
1. Try with option "6600L-USB" or "6600L-COM" and try again.
2. Try to un-install spreadtrum drivers and install again.
3. Try with smaller baudrate.
4. Try with any other computer. Should work
5. if still not solve and handset is dead, can be 99% hardware problem.

 

[New Vision]

answer: Some Tips, Tricks, Guides, Solutions, Troubleshoot for UCT Box Software

Problem Description:
Cannot connect SPD handsets with in-built battery


Solution:
Just press the * and # button on the handset and then press "Start" in UCT Software. All Should be ok now.

 

[New Vision]

answer: Some Tips, Tricks, Guides, Solutions, Troubleshoot for UCT Box Software

Problem Description:
Initializing...
DA_LIB_VER_2.5.1.2
It is sensing the pinout fast...
D-=9 D+=14
BOOT set failure, continue to scan...
Sense failure


Reason:
Pinout Finding is correct, but UCT is not able to boot the handset.


Solution:
1. If your handset have a inbuilt battery then press * and # on the phone and keep them pressed and then try to connect the handset
2. Press and hold 0 and power button on the handset and then try to connect the handset.
3. If above not work, then press and hold * button on the handset and then try to connect the handset.
4. If above not work, then press and hold 0 button on the handset and then try to connect the handset.
5. If you still cannot solve this problem, then try to locate Rx and Tx on the handset and connect using them and select "6600L-COM"

 

[New Vision]

answer: Some Tips, Tricks, Guides, Solutions, Troubleshoot for UCT Box Software

Problem Description:
Cannot enter tracker or cannot boot in meta mode

Initializing...
DA_LIB_VER_3.2.2.8
It is sensing the pinout fast,please hold on the phone Power key
RXD=8 TXD=4
Connecting...Please hold on the POWER key until the red gauge is going...
BB:6226, HardwareVer:8A02, SoftwareVer:8A01
Read info...ok, Waitting enter meta...
Connection time out.


Reason:
Low power to handset


Solution:
1. Take a power supply or the handset battery and connect it to the + and - of the handset.
2. Connect the ground only (-) from the UCT Box Main cable to the handset, dont connect the positive nide (+).
3. Try now to connect and all should be ok.

 

[New Vision]

answer: Some Tips, Tricks, Guides, Solutions, Troubleshoot for UCT Box Software

Problem Description:
Not able to connect handset with CPU 6217


Reason:
Not supported by old boot versions


Solution:
Select Boots: Ver3.848 in the Options and then try again

 

[New Vision]

answer: Some Tips, Tricks, Guides, Solutions, Troubleshoot for UCT Box Software

PLEASE
Dont Make Post To Say Thanks
Use Only