Motorola HC05/705/11/711/805/811 support in RCD

[Musakatari]

From now we start to support Motorola cpus.

Generally tool will support:

- 68HC05B16, 68HC05B32, 68HC05B4, 68HC05B6, 68HC05B8, 68HC05E6,6 8HC05F12, 68HC05F4,
- 68HC05H12, 68HC05P18, 68HC05P3, 68HC05PV8, 68HC05V12, 68HC05V7, 68HC05X16, 68HC05X32

- 68HC11A0, 68HC11A1, 68HC11A7, 68HC11A8, 68HC11E1, 68HC11E20, 68HC11E9, 68HC11EA9
- 68HC11ED0, 68HC11F1, 68HC11K4, 68HC11KA2, 68HC11KA4, 68HC11KG4, 68HC11KS2, 68HC11KW1
- 68HC11L6, 68HC11P2, 68HC11PA8, 68HC11PH8, 68HC11PB8

- 68HC705B16, 68HC705B3, 68HC705E6, 68HC705F3, 68HC705F4, 68HC705G4, 68HC705H1
- 68HC705P3, 68HC705V1, 68HC705V8, 68HC705X3

- 68HC711E20, 68HC711E9, 68HC711EA9, 68HC711K4, 68HC711KA2, 68HC711KA4
- 68HC711KS2, 68HC711L6, 68HC711P2, 68HC711PA8, 68HC711PB8, 68HC711PH8

- 68HC805PV
- 68HC811E2

Official version, is available under selfupdate of rcd2.exe

Motorola 68HC11xx Microcontroller Interface
General pinout for Clip Port - Motorola MCU :

Port2.2 - Reset (Motorola MCU)
Port2.5 - Rxd (Motorola MCU)
Port2.4 - Txd (Motorola MCU)
Port2.6 - MODB (Motorola MCU)
Port2.7 - GND (Motorola MCU)


Motorola 68HC05xx Microcontroller Interface
General pinout for Clip Port - Motorola MCU :

Port2.1 - TCAP1 (Motorola MCU)
Port2.2 - Reset (Motorola MCU)
Port2.3 - PD4 (Motorola MCU)
Port2.4 - TDO (Motorola MCU)
Port2.5 - RDI (Motorola MCU)
Port2.6 - PD3 (Motorola MCU)
Port2.7 - GND (Motorola MCU)
Port2.8 - IRQ (Motorola MCU)


Don't forget to check oscillator in target board (select or use auto to get details).
Some functions depends on models.

Direct modes will be supported for microcontrollers too .

We are waiting for your tests.

ps. Some photos from HC05B16 in action :