Mohuas

Product Supporter
Joined
Mar 6, 2013
Posts
973
Likes
15
How To Update Samsung C3752 Duos Firmware Version Using USB Cable



Turn your Samsung C3752 off, And take its battery, SIM cards, And MMC card out.
- From the flasher folder run FlashTool_E2.exe
- To Select the Firmware files from its extracted folder click on (...) button,You have to do so for each file.
- The selecting of firmware files must be in the below order:

- C3752xxxxx_psi.fls
- C3752xxxxx_slb.fls
- C3752xxxxx_BSY.fls
- C3752xxxxx_CDS.fls
- C3752Oxxxxx_CSC.dffs
(Or
C3752Oxxxxx_dffs.dffs in some versions)

- Now Check these settings:

Custom Order (Must be checked).
Erases Calibration! : Select (Erase whole flash before download).
Baud Rate: 921600
Communication Driver: Infineon USB Driver
.

- Now you can click on Next button, And a new window will appear.
- Click on Start USB1 button.
- Now you have to connect your Samsung C3752 to PC using the USB cable.
- There are more than one way to connect your phone, You can try any one of the following:

1- With the phone's battery in, Press (*) key then connect the USB cable to it.
2- Connect the USB cable to phone without battery, After it is detected you can insert the battery.
- After the FlashTool starts the update process you have to wait for some minutes.
- When the operation is done, You will see a Success word, And that means it was done right.
- Disconnect the USB cable from phone.
- With your Samsung C3752 Duos on, Do a full reset by this code *2767*3855#
 

Mohuas

Product Supporter
Joined
Mar 6, 2013
Posts
973
Likes
15
How To Update Samsung C3782 Evan Duos Firmware Using FlashLoader Program and USB Cable



Check that your phone's battery has at least 90% of charging level.
- Turn your phone off.
- Take out its battery, SIM card, And memory card.
- From the Extracted FlashLoader program run bfloader.exe
- Click Set Model button and select C3520_Citrus_Setting_v00_production.mdl
- Click Main Partition button.
- At the opened window click on Browse button to select C3782OPEN.ptt file from the extracted firmware BIN folder, Then click OK.
- Click CSC button.
- At the opened window click on Browse button to select C3782OPEN.ptt file from the extracted firmware CSC folder, Then click OK.
- Click START button.
- Put your phone's battery back but do not turn it on.
- Press and Hold 1 + 3 keys and connect the USB cable to it, And wait until the FlashLoader program detects the phone and then you can release the both keys.
- In case FlashLoader program does not detect it from the first time, Try it one more time by removing the battery and put it again, Then repeat the previous step.
- After the FlashLoader starts the update process don't touch the phone, And never stop the process or remove the USB cable.
- Wait for the process to be done, And the FlashLoader program will show you this message "Slot freed for new download", And the Download Status box will become green.
- Now you can disconnect USB cable from phone.
- After your Samsung C3782 Evan is fully on, You can do full reset using this code *2767*3855#
- Your phone will reboots, So wait for it.
 

Mohuas

Product Supporter
Joined
Mar 6, 2013
Posts
973
Likes
15
How To Update Samsung S5380 Wave Y Firmware Using MultiLoader Program



Click Boot button to select the complete Boot files folder.
Click Amss button to select amss.bin
Click Apps button to select: apps_compressed.bin
Click Rsrc1 button to select: Rsrc_S5380_xxxx_xxxxxx_Common.rc1
Click Rsrc2 button to select: Rsrc2_S5380(Low).rc2
Click Factory FS button to select: FactoryFs_S5380_xxxx_xxxxxx_Common.ffs
Click SHP APP button to select: ShpApp.app
Click CSC button to select: CSC_S5380_xxxx_xxxxxx_Common_Oxx.csc
Click FOTA button to select bplib_S5380_OpEuroCommon.fota
- Put the phone's battery back but do not turn it on.
- Put your phone into Download Mode:
Press and Hold Volume Down Key + Home Key then press Power Key.

- Connect USB cable to phone and PC, Then wait until Windows detects it and install the needed drivers for it.
- Click on Search Port button, And Multiloader program will detects the phone's Com port number.
- Now you can start the update by clicking Download button.


FIRMWARE::::::

S5380AELH1 / SFRLH1 France SFR
- S5380AGKK5 / BOGKK3 France Bouygues
- S5380AGLH1 / BOGLH1 France Bouygues
- S5380AGLJ1 / BOGLH1 France Bouygues
- S5380MSLE1 / XEULE1 Ireland / UK
- S5380NALH1 / NRJLH1 France NRJ
- S5380XEKK4 Russia
- S5380XXKK4 / OXCKK1 PHE Spain
- S5380XXKK4 / OXDKK1 XEZ Czech
- S5380XXKK4 / OXDKL1 O2C Czech O2
- S5380XXLC1 / OXALC2 XEF France
- S5380XXLC1 / OXFLD1 SEB Baltic
-----------------------------------------
Samsung S5380D Firmwares:
- S5380DAILD1 / TIMLD1 Italy TIM
- S5380DCXKL1 / PLSKL1 Poland Plus
- S5380DCXKL2 / PLSKL2 Poland Plus
- S5380DDXKK6 / OLBKK3 Southeast Asia
- S5380DJPKL1 Arabic
- S5380DJVKK4 / OJVKK2 XFE South Africa
- S5380DNELC1 / HUILC1 Italy H3G
- S5380DXXKK4 / OXAKK1 ITV Italy
- S5380DXXKK4 / OXCKL2 TPH Portugal
- S5380DXXKK4 / OXEKK1 SEK Ukraine Kyivstar
- S5380DXXKK4 / OXEKK1 VHC Ukraine
- S5380DXXKK4 / OXFKL4 COA Romania Cosmote
- S5380DXXKK4 / WINLA1 Italy Wind
- S5380DXXLA1 / OXDLA1 VDH Hungary
- S5380DXXLA3 / OMNLA3 Italy Vodafonel
- S5380DXXLB1 / OXDLB1 XSK Slovakia
- S5380DXXLC1 / OXFLE1 TOP Serbia VIP
- S5380DXXLF1 / OXELC1 SER Russia
- S5380DZCLG1 / OZCLG1 CHN China
- S5380DZHLB1 / ZZHLB1 TGY Hong Kong
- S5380DZLLB3 / ZZLLB4 BRI Taiwan
 

Mohuas

Product Supporter
Joined
Mar 6, 2013
Posts
973
Likes
15
How To Update Samsung S6312 Galaxy Young Duos Firmware

Turn your phone off.
- Take out your phone's battery, SIM Card, And memory card.
- Run Odin.exe program.
- Make sure that Auto Reboot, F.Reset Time options are checked.
- At this step you have to select the firmware files from its extracted folder:

Click PDA button to select CODE_S6312xxxxxx_900805_REV03_user_low_ship.tar.md5
Click PHONE button to select MODEM_S6312xxxxxx_900805_REV03_user_low_ship.tar.md5
Click CSC button to select CSC_Oxx_S6312Oxxxxxx_894543_REV03_user_low_ship.tar.md5

- Put your phone's battery back but don't turn it on.
- To put your phone into Download Mode:

Press and Hold Volume Down key + Home key, Then press Power key until you see the warning message on phone's screen, Now release all keys and press Volume Up key.




Firmware::::

S6312XXAMB2 / OXEAMB1 SER Russia
- S6312XXAMB2 / OXEAMB1 SEK Ukraine Kyivstar
- S6312XXAMB2 / OXXAMA9 DBT Germany
- S6312XXAMB2 / OXFAMB1 COA Romania Cosmote
- S6312XXAMB9 / OXEAMB1 SER Russia
- S6312XXAMB9 / OXFAMB1 COA Romania Cosmote
- S6312XXAMBG / OXEAMB1 SER Russia
- S6312XXAMBG / OXXAMA9 DBT Germany
- S6312XXAMC1 / OJVAMB2 EGY Egypt
- S6312XXAMC1 / OJVAMB2 XSG United Arab Emirates



Flasher::::Odin307 - Download - 4shared






 

Mohuas

Product Supporter
Joined
Mar 6, 2013
Posts
973
Likes
15
How To Update Samsung S3850 Corby II Firmware Using Multiloader Program and USB Cable



Turn off your Samsung S3850 and take out its battery, SIM Card, And MMC card too.
- Run Multiloader.exe program.
- Select BRCM2133 as CPU type.
- In case you want or need to flash Boot files too, Then check Full Download option, Otherwise leave it unchecked.
- Now you have to select the following files from the extracted firmware folder:

Click Boot button to select the complete Boot files folder.
Click Apps button to select: apps_compressed.bin
Click Rsrc1 button to select: Rsrc_S3850_xxxx_xxxxxx_Common.rc1
Click Rsrc2 button to select: Rsrc2_S3850(Low).rc2
Click Factory FS button to select: FactoryFs_S3850_xxxx_xxxxxx_Common.ffs
Click CSC button to select: CSC_S3850_xxxx_xxxxxx_Common_Oxx.csc
Click SHP APP button to select: ShpApp.app

- Put the phone's battery back but do not turn it on.
- Put your phone into Download Mode:
Press and Hold Volume Down Key + Send Key then press Power Key.



Firmware:::Hotfile.com: One click file hosting: S3850XXKC2_OXA.rar



Flasher:::MultiLoader V5.67 - Download - 4shared
 

Mohuas

Product Supporter
Joined
Mar 6, 2013
Posts
973
Likes
15
How To Update Samsung S5690 Galaxy Xcover Firmware To The Latest Official Firmware Version




Turn off the phone and take out its battery, SIM card, And Memory card too.
- Run Odin.exe program.
- In case you have *.pit file of Samsung S5690 and the firmware package that you downloaded is a complete one, Then check Re-Partition option, Otherwise leave it unchecked.
- Click PIT button and select: Marvell_Partition.pit
- Click BOOTLOADER button to select: BOOT_S5690xxxxx.tar.md5
- Click PDA button to select: PDA_S5690xxxxx.tar.md5
- Click PHONE button to select: MODEM_S5690xxxxx.tar.md5
- Click CSC button to select: GT-S5690-MULTI-CSC-Oxxxxx.tar.md5
- Put the phone's battery back but do not turn it on.
- Now you have to connect your phone to PC in Download Mode, To do so Press and Hold Volume Down Key + Home Key, Then connect USB cable to phone, Keep pressing these keys until Odin detects your phone.



Firmware:::

S5690AILB2 / TIMLA2 Italy TIM
- S5690AILL2 / TIMLL1 Italy TIM
- S5690BOLE2 / DTMLE2 Germany T-Mobile
- S5690BOLL1 / DTMLK1 Germany T-Mobile
- S5690BVLD1 / OROLD1 Romania Orange
- S5690BVLF2 / OROLF2 Romania Orange
- S5690BVLF2 / FTMLF2 France Orange
- S5690BVLF2 / ORALF2 UK Orange
- S5690BVLF2 / TMULF2 UK T-Mobile
- S5690BVLL2 / OROLL2 Romania Orange
- S5690BVLL2 / ORALL2 UK Orange
- S5690BVLL2 / TMULL2 UK T-Mobile
- S5690XXKL1 / DBTKK1 Germany
- S5690XXKL1 / OXFKL1 BGL Bulgaria
- S5690XXKL1 / LUXKK1 Luxembourg
- S5690XXKL1 / XENKK1 Netherlands
- S5690XXKL1 / PROKL1 Belgium - Luxemburg
- S5690XXKL3 / NEEKK8 Nordic Countries
- S5690XXLA1 / OXFKL2 COA Romania
- S5690XXLA1 / OXFKL2 SIM Slovenia Si.mobil
- S5690XXLA6 / DBTKK1 Germany
- S5690XXLA6 / DRELA1 Austria 3 Hutchison
- S5690XXLA6 / MOTKK3 Slovenia Mobitel
- S5690XXLA6 / TMNLA2 Portugal
- S5690XXLB7 / PROLB1 Belgium
- S5690XXLB7 / PROLB1 Belgium/Luxemburg
- S5690XXLE5 / XEULF1 UK - Ireland
- S5690XXLE5 / DBTLF1 Germany
- S5690XXLE5 / ATOLF1 Austria
- S5690XXLE5 / AUTLF1 Switzerland
- S5690XXLE5 / TCLLF1 Portugal Vodafone
- S5690XXLE5 / OXXLE5 TPH Portugal
- S5690XXLE5 / OXXLE5 XEH Hungary
- S5690XXLE5 / OXXLE5 XSK Slovakia
- S5690XXLE5 / OXELF1 Russia Complete
- S5690XXLG1 / DRELA1 Austria 3 Hutchison
- S5690XXLG3 / ATOLH1 Austria
- S5690XXLG3 / OXELF1 SER Russia
- S5690XXLJ2 / DBTLJ1 Germany
- S5690XXLJ2 / XEULJ2 UK / Ireland
- S5690XXLJ2 / MOTLJ1 Slovenia Mobitel
- S5690XXLJ2 / HTSLC1 Sweden 3
- S5690XXLJ2 / TENLB1 Norway Telenor
- S5690XXLJ2 / ATOLH1 Austria
- S5690XXLJ2 / ONELH1 Austria Orange
- S5690XXLK3 / VNZLL1 New Zealand Vodafone
- S5690XXLL1 / OXXLL1 XEH Hungary
- S5690XXLL1 / ATOLL1 Austria
- S5690XXLL1 / AUTLL1 Switzerland
- S5690XXLL1 / DBTLL1 Germany
- S5690XXLL1 / TENLL1 Norway Telenor
- S5690XXLL1 / ONELL1 Austria Orange
- S5690XXLL1 / DRELA1 Austria 3 Hutchison
- S5690XXLL1 / LUXLL1 Luxembourg
- S5690XXLL1 / MOTLJ1 Slovenia Mobitel
- S5690XXLL1 / METLJ1 Ireland Meteor
- S5690XXLL1 / PROLL1 Belgium Luxemburg
- S5690XXLL1 / SWCLA3 Switzerland Swisscom
- S5690XXLL1 / EPLLL1 Germany E-Plus
- S5690XXLL1 / XENLJ1 Netherlands
- S5690XXLL1 / XEULL1 UK / Ireland
- S5690XXLL1 / OXELF1 SER Russia
- S5690XXLL1 / OXELF1 SEK Ukraine Kyivstar
- S5690XXLL1 / OXELF1 VHC Ukraine
Flasher:::S5360_Downloader - Download - 4shared



Usb Driver::::Hotfile.com: One click file hosting: SAMSUNG_USB_Driver_for_Mobile_Phones_v1_3_2300_0.rar
 

Mohuas

Product Supporter
Joined
Mar 6, 2013
Posts
973
Likes
15
How To Update Samsung S5301 Galaxy Pocket Plus Firmware Using Odin Program



Turn off your Galaxy Pocket Plus and take out its battery, SIM card, And MMC card.
- Run Odin.exe program.
- You will notice that Auto Reboot and F.Reset Time options are checked, Leave them as they are.
- In case you have or need to flash *.PIT file then check Re.Partition option, Otherwise leave it unchecked.
- In the next steps you will select the needed firmware files from the extracted firmware folder.
- Click PIT button and select the S5301 *.pit file (If you checked Re.Partition option).
- Click PDA button to select CODE_S5301xxxxxx_...REV02_...tar.md5
- Click PHONE button to select MODEM_S5301xxxxxx_...REV02_....tar.md5
- Click CSC button to select CSC_Oxx_S5301xxxxxx_...REV02_....tar.md5

- In case you have only one big file inside the firmware package, Then you need to select it as PDA file, And never check Re.Partition option or use *.pit file.
- Put the battery back into your phone, But do not turn it on.
- You should put the phone into Download Mode, Do these steps for that:

Press and Hold Volume Down key + Home key, Then press Power key.






Firmware:::

S5301XXALJ7 / OXXALJ8 LUX Luxembourg
- S5301XXALJ8 / PROALK1 Belgium/Luxemburg
- S5301XXALK3 / OJVALK2 TUR Turkey
- S5301XXALK3 / OJVALK2 XSG United Arab Emirates
- S5301XXALK3 / OJVALK2 JED Saudi Arabia
- S5301XXALK3 / OJVALK2 KSA Saudi Arabia
- S5301XXALK3 / OJVALK2 EGY Egypt
- S5301XXALK3 / OJVALK2 XFA South Africa
- S5301XXALK3 / OJVALK2 XFE South Africa
- S5301XXALK3 / OJVALK2 XFV South Africa Vodafone
- S5301XXALL1 / OXFALL1 SEB Baltic
- S5301XXAMA3 / OMNAMA1 Italy Vodafone
- S5301XXAMA3 / WINAMA1 Italy Wind
- S5301ZSAMA7 / OZSAMA7 TGY Hong Kong


Flasher:::http://www.4shared.com/get/hY4jpMzo/I9300_Odin3_v304.html

 

Mohuas

Product Supporter
Joined
Mar 6, 2013
Posts
973
Likes
15
How To Update Samsung T999 Galaxy S3 Firmware By Using Odin Flasher


Turn off your GS3 T999, Take its battery, SIM card, And MMC card out.
- Run Odin.exe
- By default the Auto Reboot and F.Reset Time are checked, So keep them checked.
- Open the extracted firmware folder and you will see one big file inside it:

For T999: T999UVDLJC_T999TMBDLJC_T999UVDLJC_HOME.tar.md5
For T999v: KIES_HOME_T999VVLDLL1_T999VYVLDLL1_CL616748_REV04_user_low_ship.tar.md5

- The files we mentioned are only as example, You can use any version you want.
- Now click on PDA button at Odin's window and select the above firmware file.
- Put the battery into your phone, But do not turn it on.
- To put your GS3 T999 into download mode follow these steps:

Press and Hold Volume Down key, Then press Power key until you get the warning message on your phone's screen.
- Release both keys and press Volume Up key to be in Download Mod



Firmware t999:::

T999UVDLJA / TMBDLJA USA T-Mobile






Firmware t999v:::

T999VVLDLL1 / YVLDLL1 GLW Canada Wind Mobile
- T999VVLDLL1 / YVLDLL1 MCT Canada Mobilicity
- T999VVLDLL1 / YVLDLL1 VTR Canada Videotron






Flasher:::

Odin307 - Download - 4shared
 

Mohuas

Product Supporter
Joined
Mar 6, 2013
Posts
973
Likes
15
other any samsung want to firmware or flasher and usb driver then post here,
i give u link perfect and tutorials.
 

khalilur

Junior Member
Joined
Sep 27, 2011
Posts
34
Likes
0
Any solutionfor this error

mx_key.jpg

PLS HELP ME................................
 
Top