Gun Ryed

Product Supporter
Joined
Sep 30, 2010
Posts
334
Likes
15
A/ You have just received clip...what to do?

[FONT=Verdana, Arial, Helvetica, sans-serif] * Pls register to our support area
* Download FMAClient
* Update your clip Online
* To power clip pls use 9V battery or 1000MA/15V adaptor
[/FONT]

B/ How to use the switch?

A.jpg


Position A will allow you to unlock all other VLE5/6 Alcatel :
E101[FONT=Verdana, Arial, Helvetica, sans-serif] E100, E105, E107, E157, E158, E159,E160, E201, E220, E225, E230, E252, E256, E257, E259, E260, E265, E801, E805 etc..

B.jpg


[/FONT][FONT=Verdana, Arial, Helvetica, sans-serif]Position B will allow you to unlock all new VLE5/6 Alcatel :[/FONT]
[FONT=Verdana, Arial, Helvetica, sans-serif] E107, E207, E221, E227, etc

[/FONT][FONT=Verdana, Arial, Helvetica, sans-serif]C/ How to use?[/FONT]

[FONT=Verdana, Arial, Helvetica, sans-serif]* Power clip (Green light will shine on RJ45)
* Connect phone ( powered off)
* Select appropriate switch position
* Power on phone...Both Led will shine and orange LED will blink. Process is finished and phone is unlocked.
* Once you insert sim, phone might requires code...Any codes will be accepted
[/FONT]

[FONT=Verdana, Arial, Helvetica, sans-serif]D/ What is the led code?[/FONT]

[FONT=Verdana, Arial, Helvetica, sans-serif]* Green led is shinning : you need connect phone an power it on
* Orange led is shinning : means that phone is detected
* Orange led is blinking : means that operation was successfull
* Green led and Orange are blinking : Means an Error (could be that the phone is not detected, that the clip require and update, an error during the comunication with phone or and unlocking error)
[/FONT]


www.fmaclip.com
www.matadorengine.com
 
Top