10.08.2013 RIFF JTAG – Samsung GT-S7572 Galaxy Trend Duos II Unbrick – Total Repair supported

[josher]

Repairing bricked Samsung S7572 is easy with the RIFF Box.

Note, one simple way to connect over JTAG – connect USB cable to PC and insert battery. In this case phone is automatically powered on, so no need to press any power-on buttons on the phone keypad.
To resurrect Samsung S7572:

• Solder JTAG cable to Samsung S7572 JTAG pads;
• Insert USB Data cable into board and PC;
• Make sure Samsung S7572 is selected in the list of models;
• Click Resurrect button;
• Wait till software signals a successful operation completion;
• Disconnect power supply, de-solder JTAG wires;

Now phone is in bootable condition, that is, even if it does not start up normally, you can flash it using known flashing methods.
To enter download mode:

• Disconnect PC cable;
• Insert battery;
• Hold ‘Volume Down’ and ‘Home’ keys and press Power-On.

.