IMEI Source

IMEI Source (http://forum.imeisource.com/index.php)
-   Nokia Hardware & Hardware-Repair Area (http://forum.imeisource.com/forumdisplay.php?f=38)
-   -   BB5 EMI / ESD FILTER ICíS CONFIGURATION AND MODIFICATION WITH TROUBLESHOOTING PROCEDURES (http://forum.imeisource.com/showthread.php?t=3432)

Gun Ryed 03-01-2011 13:43

BB5 EMI / ESD FILTER ICíS CONFIGURATION AND MODIFICATION WITH TROUBLESHOOTING PROCEDURES
 
BB5 EMI / ESD FILTER ICíS CONFIGURATION AND MODIFICATION WITH TROUBLESHOOTING PROCEDURESÖ.




What is EMI/ESD Filter?

This Filter where designed by Mobile Phones Engineers to protect the following hazardous elements in Electronic circuits...
Electromagnetic interference (or EMI, also called radio frequency interference or RFI) is a disturbance that affects an electrical circuit due to either electromagnetic conduction or electromagnetic radiation emitted from an external source. [1] The disturbance may interrupt, obstruct, or otherwise degrade or limit the effective performance of the circuit. The source may be any object, artificial or natural, that carries rapidly changing electrical currents, such as an electrical circuit, the Sun or the Northern Lights.
EMI can be intentionally used for radio jamming, as in some forms of electronic warfare, or can occur unintentionally, as a result of spurious emissions for example through intermodulation products, and the like. It frequently affects the reception of AM radio in urban areas. It can also affect cell phone, FM radio and television reception, although to a lesser extent.

Electrostatic discharge (ESD) is the sudden and momentary electric current that flows between two objects at different electrical potentials caused by direct contact or induced by an electrostatic field. [1] The term is usually used in the electronics and other industries to describe momentary unwanted currents that may cause damage to electronic equipment.
ESD is a serious issue in solid state electronics, such as integrated circuits. Integrated circuits are made from semiconductor materials such as silicon and insulating materials such as silicon dioxide. Either of these materials can suffer permanent damage when subjected to high voltages, as a result there are now a number of antistatic devices that help prevent static build up. (quote in wikipidia)



http://gsmsandwich.com.ph/forum/high...cs/warning.gif
http://i665.photobucket.com/albums/v.../crystalIC.jpg

Here is a list of codes on EMI/ESD filter in every Nokia Circuits...


http://gsmsandwich.com.ph/forum/high...cs/warning.gif
http://i665.photobucket.com/albums/v...dkim/label.jpg


All times are GMT +1. The time now is 08:02.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2018, vBulletin Solutions Inc.